-
Remote AP function - howto get it running...
Hi Does anyone have experience with the new remote AP function?I am testing it out using a WAC500 and so far I have noticed two specific behaviours: 1. the CAPWAP ports were not added to the WAN to Device group. I solved this by manually adding "CAPWAP-DATA" and "CAPWAP-Control" to the "Default_Allow_WAN_To_ZyWALL" group.…
-
Unique DNS for each SSID
I am setting up a guest network with a more restrictive DNS, cloudflare family. I only see an option to set the DNS for the entire network and not each individual SSID. I do not need this filtering on the other SSID.
-
NWA5123-AC Alternative with NXC2500
Hi We use the NWA5123-AC with the NXC2500 Controller. I understand the AP's are EOL very soon ?? Which new AP can I buy which will work with the NXC2500 ? Thank You
-
NXC2500 switching between primary and secondary radius server doesn't work
Hello, As described in the topic. I have configured SSID on NXC2500 with External Radius Server type (primary and secondary). The configuration has been provisioned to all my UAP. I can connect to WiFi with AD credentials, but when I turn off the primary radius server, I can't connect to WiFi. What's more, I don't see any…
-
VLAN on WiFi Hotspot NWA1123-AC-Pro not working
Hi I want to segregate my wirless network with VLAN's.I have an usg60W - GS2210 - NWA1123AC-Pro configuartion. I created the VLAN's on the USG Firewall including a DHCP on each of the VLAN's. I created VLAN's on subnet on the GS2210 Switch I associated every SSID to a VLAN on the NWA1123 unfortunately I probably have a…
-
Moved: Switch errors
This discussion has been moved.
-
Не могу узнать номер модели
Здравствуйте, не могу узнать номер модели своего роутера. Следовал инструкции по поиску номера модели на этой странице https://www.zyxel.com/ru/ru/support/howto_find_model.shtml , но это не дало никакой информации по этому поводу, на устройстве нет никаких маркировок, а упаковка выброшена
-
Guest SSID Disappears when I enable NAT
hI, I wish to configure a guest SSID with no password and NAT enabled so my network in protected. However every time I enable NAT the SSID disappears. Can someone please help?
-
configure private and guest WLAN on NWA1123-AC-PRO with USG110
Dear community oh boy, it looks like I bought the wrong AP. I have a NWA1123-AC-PRO and USG110 with latest firmware as of today. What I simple want, is to setup up a WLAN for guests and a WLAN for to access my other devices in the network. I configured/definied- LAN1 with USG ports 4,5,6, IP 192.168.2.x _ LAN2 with USG…
-
cannot put NVM1123-AC-Pro in "Management Mode" to manage with USG110
I have a Zyxel NVM1123-AC-Pro Access Point with the latest firmware v6.20 (ABHD.0) and a Zyxel USG110 with latest firmware v4.64 (AAPH.0). But I'm unable to put the AP into "Management Mode". In older documentation/screenshots one has to under configuration > network > Management Mode either "Standalone" or "Managed AP".…
-
WiFi Controller - From USG310 to ATP500 (cannot move APs)
Hi. we have just acquire a new customer. The assistance they had before installed a USG310 and enabled WiFi controller function to control 9 NWA-5121ni APs.Now we replaced the firewall with an ATP500. It should be able to control 34 APs with gold license (first year). When I try to connect the AP Network to the new ATP, I…
-
Connecting NWA5123-AC-HD to NXC2500
Hi, I am having trouble connecting a brand new NWA5123-AC-HD to our NXC2500. What happens is, is : - Connect the NWA5123-AC-HD to our wifi lan- NXC2500 sees it, gives it an IP Address- Then it goes "offline" shortly after (according to the NXC2500) - If I go directly to the IP Address of the NWA5123-AC-HD I can see its…
-
Auswirkung der Einstellung "Wand-/Deckenmontage" am WAX610D
Hallo, welche Auswirkung genau hat die Einstellung "Wand-/Deckenmontage" am WAX610D? Also wie verändert das die Abstrahlung der Antennen?
-
Console port
Hello, The NWA5123 series has a 4-pin console port. Where can I get the console cable? Thank you? BR, Fernando Vieira
-
NWA1123-ACv2 - ALERT - Uplink currently operates at a lower speed 100Mbps
I am trialing a NWA1123-ACv2 and thought I have plugged it into a PoE Gigabit switch. But when I looked at it via the Nebula system, I am getting the following error in the Uplink section on the Access Point Status " Uplink currently operates at a lower speed 100Mbps". Can anyone suggest what might be causing this please?…
-
USG60 and WAX610D
Hi, I thought/assumed I would be able to control two WAX610D from a USG60 but I cannot get it to work. Should it work? ThxHenric
-
Not sure if Router is causing the issue
Hi all. I have recently moved business ISP on Monday 24 June and new has provided an Zyxel VMG1312-T20b router. We run a DT Module program that connects 2 ipads in the program to the Laptop on the same network. Initially this was working fine, but last couple of days has been a bit temperamental and today the ipads would…
-
Access point & Multi SSID
Hi everybody Is it someone who can tell me wich 1st access point (cheaper) is able to do multi SSID ???
-
WAX610d unreachable, LED status not described in manual
Within my local site, I have a number of WAX610d. At first all were fully functional, but after 48 hours, I lost connection with one. After having tried rebooting and resetting, I still get the same LED-cycle: 10 seconds Green, 20 seconds Amber, 90 seconds Green/Amber 1s/1s blinking. What does the LED cycle mean, and is…
-
WAX650S 3rd radio
"WAX650S has a 3rd radio dedicated in scanning and
monitor wireless environment. It reserves the main 2.4GHz
and 5GHz radio focus on service and service only" source: latest WAX650S data sheet. 1) Can this third radio be used to detect rogue APs? 2) Is it used to speed up DCS? 3) When will this third radio be tied into USG…