-
Не могу узнать номер модели
Здравствуйте, не могу узнать номер модели своего роутера. Следовал инструкции по поиску номера модели на этой странице https://www.zyxel.com/ru/ru/support/howto_find_model.shtml , но это не дало никакой информации по этому поводу, на устройстве нет никаких маркировок, а упаковка выброшена
-
Guest SSID Disappears when I enable NAT
hI, I wish to configure a guest SSID with no password and NAT enabled so my network in protected. However every time I enable NAT the SSID disappears. Can someone please help?
-
configure private and guest WLAN on NWA1123-AC-PRO with USG110
Dear community oh boy, it looks like I bought the wrong AP. I have a NWA1123-AC-PRO and USG110 with latest firmware as of today. What I simple want, is to setup up a WLAN for guests and a WLAN for to access my other devices in the network. I configured/definied- LAN1 with USG ports 4,5,6, IP 192.168.2.x _ LAN2 with USG…
-
cannot put NVM1123-AC-Pro in "Management Mode" to manage with USG110
I have a Zyxel NVM1123-AC-Pro Access Point with the latest firmware v6.20 (ABHD.0) and a Zyxel USG110 with latest firmware v4.64 (AAPH.0). But I'm unable to put the AP into "Management Mode". In older documentation/screenshots one has to under configuration > network > Management Mode either "Standalone" or "Managed AP".…
-
WiFi Controller - From USG310 to ATP500 (cannot move APs)
Hi. we have just acquire a new customer. The assistance they had before installed a USG310 and enabled WiFi controller function to control 9 NWA-5121ni APs.Now we replaced the firewall with an ATP500. It should be able to control 34 APs with gold license (first year). When I try to connect the AP Network to the new ATP, I…
-
Connecting NWA5123-AC-HD to NXC2500
Hi, I am having trouble connecting a brand new NWA5123-AC-HD to our NXC2500. What happens is, is : - Connect the NWA5123-AC-HD to our wifi lan- NXC2500 sees it, gives it an IP Address- Then it goes "offline" shortly after (according to the NXC2500) - If I go directly to the IP Address of the NWA5123-AC-HD I can see its…
-
Auswirkung der Einstellung "Wand-/Deckenmontage" am WAX610D
Hallo, welche Auswirkung genau hat die Einstellung "Wand-/Deckenmontage" am WAX610D? Also wie verändert das die Abstrahlung der Antennen?
-
Console port
Hello, The NWA5123 series has a 4-pin console port. Where can I get the console cable? Thank you? BR, Fernando Vieira
-
NWA1123-ACv2 - ALERT - Uplink currently operates at a lower speed 100Mbps
I am trialing a NWA1123-ACv2 and thought I have plugged it into a PoE Gigabit switch. But when I looked at it via the Nebula system, I am getting the following error in the Uplink section on the Access Point Status " Uplink currently operates at a lower speed 100Mbps". Can anyone suggest what might be causing this please?…
-
USG60 and WAX610D
Hi, I thought/assumed I would be able to control two WAX610D from a USG60 but I cannot get it to work. Should it work? ThxHenric
-
Not sure if Router is causing the issue
Hi all. I have recently moved business ISP on Monday 24 June and new has provided an Zyxel VMG1312-T20b router. We run a DT Module program that connects 2 ipads in the program to the Laptop on the same network. Initially this was working fine, but last couple of days has been a bit temperamental and today the ipads would…
-
Access point & Multi SSID
Hi everybody Is it someone who can tell me wich 1st access point (cheaper) is able to do multi SSID ???
-
WAX610d unreachable, LED status not described in manual
Within my local site, I have a number of WAX610d. At first all were fully functional, but after 48 hours, I lost connection with one. After having tried rebooting and resetting, I still get the same LED-cycle: 10 seconds Green, 20 seconds Amber, 90 seconds Green/Amber 1s/1s blinking. What does the LED cycle mean, and is…
-
WAX650S 3rd radio
"WAX650S has a 3rd radio dedicated in scanning and
monitor wireless environment. It reserves the main 2.4GHz
and 5GHz radio focus on service and service only" source: latest WAX650S data sheet. 1) Can this third radio be used to detect rogue APs? 2) Is it used to speed up DCS? 3) When will this third radio be tied into USG…
-
factory reset wont work
My AP NWA1123-AC HD will no longer connect to the LAN. I can see it on NCC but holding in the reset button does not reset the device. Current version: V6.20(ABIN.0) Doesn't connect with DHCP or static IP What can I do? Thanks, Allen
-
Bricked AP
Hi, I need the procedure to recover a NWA5123-AC which has been restarted during firmware update. Thanks, IT Field
-
AP Disconnect. Reason:Idle in JOIN State,Model:WAX510D
USG 60W V4.62 as controller WAX510D V6.20 After rebooting my
USG60W I'm getting “AP Disconnect. MAC:,Name:AP-,Reason:Idle in
JOIN State,Model:WAX510D” I think the problem has
to do with the firmware of the AP odd thing is the wifi works but the
AP is going amber and green all the time on the LED. Workaround unplug the
AP…
-
Zyxel AP / Can't connect Amazon ALEXA / error has deauth by STA Logout on Channel
AP Zyxel NEBULA : NWA110AX Current version: V6.20(ABTG.0) always got this error when trying to connect my echo amazon alexa echo: Wireless LANStation: 94:3a:91:bc:6d:2a has deauth by STA Logout on Channel: 48, SSID: sspin452bis, 5GHz, Signal: -42dBm, Download/Upload: 39545/222104 Bytes. reason 3, Interface:wlan-2-2…
-
accessing the gui interface
hi - have a nwa 1121-ni. Want to use it as a WAP on an existing network connecting directly to my main router then set up a guest account on the 1120 as my router does not have that option. Run into several problems where I need advice. Firstly cannot access the web configurator via a direct cable link to a laptop. Laptop…
-
Expand a NWA 3560-N controlled network
Good evening, a customer of mine have a network of 15 NWA3560-N access point with a NWA3560-N set up as controller. They want to add some more recent access point in some areas to obtain more troughtput. Is there a new controller capable of managing both old NWA3560-N and new access point ? Thank you, Best regards, Pier…
