-
NWA1123-AC as an additional AP
Hi I have a NWA1123-AC (not V2) that I wish to use as an additional access point on my network. I have a wireless router that sits in one end on the house, and the NWA1123-AC will be connected to it by a cable in the other end of the house. Both devices support both 2,4 GHz and 5 GHz wifi. Ideally, the NWA1123-AC would…
-
Will 5.9GHz spectrum for 5GHz Wi-Fi be added via firmware for existing WAX 510D, WAX 610D, WAX650S?
Will 5.9GHz spectrum for 5GHz Wi-Fi be added via firmware for existing WAX 510D, WAX 610D, WAX650S or other 5GHz products? The FCC approved this November 18, 2020 after several years of discussions: https://www.fcc.gov/document/fcc-modernizes-59-ghz-band-improve-wi-fi-and-automotive-safety. If nothing else hopefully if…
-
Zyxel NWA210AX slow wifi
We have 3 Zyxel NWA210AX Accespoints, but at 2.5 and 5Ghz we only get 1/3 the speed, Tested with various clients but always results 1/3 of the WAN speed, with cable all clients good speed. Why could this be?
-
How to risolve the problem with CLI error sh: ifconfig: not found
I’m using AMG1312-T10B, AMG1202-T10B,
AMG1302-T11C and I want to manage them with ssh. I am able to change the
password of WIFI with CLI command: wlancmd pskkey set -i 0 ***** and it works.
But when I want to turn off the WiFi with command wlancmd up -i 1 it gives me
the error: sh: ifconfig: not found. How can I fix it.…
-
NXC2500
All our suppliers have dropped the NXC2500/NXC5500. Are these products End of Life? It seems these are not available anywhere in the Netherlands. And I can't find a reason why.
-
NWA1123-AC repeater mode not working
Hi community I am struggling with the configuration of a NWA1123-AC that should act as a repeater. I use the NWA1123-AC in my garage to provide good wifi-coverage for smart home actors, no need of super-fast speed. NWA1123-ACIn repeater mode on 2.4GhzProfile1 = SSID name of the ones it should repeatSecProfile 1 = password…
-
Zyxel AP/WLAN Controller support for vlan pool / aaa override
Hi, We have a radius server setup that allows VLAN allocation using a pool. Is there a way to setup Zyxel to support vlan pooling or aaa override instead of static or individual dynamic vlan. Here is the high-level traffic flow. User A connects to the Zyxel AP WiFi SSID ---> Authentication/Authorisation is exchanged…
-
NXC5500 AD Authentifizierung Firmware 6.10
Hallo, ich habe gestern das Firmware Update 6.10 auf unseren NXC5500 eingespielt. Und seit dem funktioniert der Login per AD/LDAP nicht mehr. Im Log erscheint: RADIUS: rejecting the user 'username' sowieSTA MAC-Adresse has blocked by Auth Fails (AAA Profile: AD) on Channel 48: SSID reason 23, Interface:wlan-2-3 das ganze…
-
WAC6503D-S power problem with Cisco Switch WS-C2960X-24PD-L [solved]
Hi, zyxell NXC5500 , 115 AP ( WAC6103D-I and WAC6503D-S ) , all switches are cisco. on Cisco Switch WS-C2960X-24PD-L ( poe + mode 4 available) We have a problem with all the WAC6503D-S on the controller interface : Monitor -> Wireless -> AP information for WAC6103D-I power mode = full for all for WAC6503D-S power mode =…
-
NWA1123-AC PRO Slow download speed, fast upload speed
We get our internet connectivity via 4G. Typically 70MB down and 30MB up. I have three NWA1123-ACv2 's. One in the main house and 1 in each cottage all connected via cable to the router. They all operate well connecting at 30MB up and 70MB down I have one NWA1123-AC Pro which is setup as an external AP to link to a remote…
-
4 AP (NWA1123-ACv2) setup - dropping connection
We just installed 4 - APs (NWA1123-ACv2) for a clients warehouse & office space. They are complaining about dropping connections even if they are standing in one place directly under one of the Ap's. In looing at the NCC I noticed 3 of them are using channel 11. Shouldn't they be talking to each other and optimizing the…
-
CenturyLink Zyxel C3000Z with TP-Link AC1750 WiFi Extender however signal drops
As of late moved into another house in Portland, Ore. furthermore, am associated with the by and large great CenturyLink gigabit fiber. They're running it into the house through a Calix 716GE-I R2 ONT and associated then to Zyxel C3000Z. The house is 3300 sq. feet and I have two TP-Link AC1750 WiFi Extenders in the cellar…
-
Find connected device
Hi guys, I'd like to ask you if have an idea, how to find a device (its last connection) according to its MAC address? Our WC is NXC5500. Story: Somebody has stolen two our's BarCodeScanners. I've got their MAC addresses and would like to search the WC logs, where (on which AP) and when, were these two BCS devices…
-
WAC6103D-I daily unintended rebooting
We own a single AP of type WAC6103D-I which is connected and managed by our USG110. The USG is running under FW 4.38 (AAPH.0) while the USG AP Management is showing the runtime firmware: V5.40 Patch 2-6.10 Patch 2.Additionally the list of local installed FWs is showing following AP FWs:NWA5123-AC: local / v5.40…
-
802.1x Authentication with AD groups
How do I set up 802.1x authentication against Active Directory where only users who belong to a specific AD security group are authenticated? I don't want all domain users to be able to authenticate to the WLAN just ones that I have added to a specific AD security group. I see in the Users/Groups section where I can create…
-
Zyxel WAC6553D-E
Bom dia tudo tranquilo? Estou com um zyxel WAC6553D-E que retirei da caixa agora a pouco comprado novo junto com outros do mesmo modelo, porém esse eu tenho resposta de ping no ip padrão 192.168.1.2, acesso ele via SSH e via terminal, ja resetei e não consigo acessar ele pelo navegador para configurar, só aparece a…
-
Zyxel AP Unable to handle a simple bridge
Hi, I would like to point an issue that we were able to identify on two different Zyxel AP series (NAP102 and NWA5123) and probably exists on all Zyxel AP Here is how you can reproduce the bug : - Create a bridge on a router. It doesn't need to be a Zyxel one. We use an OpenWRT router for our test.- Put in 3 interfaces…
-
WAC6552D-S reset configuration to default
Hi, Have a WAC6552D-S which have been managed by the management feature in VPN100. I don't want the VPN100 to manage it anymore, so I have removed it from the management page. It's configured with a static IP address, and I can find it with the ZON utility. The headache is, that I think it has been configured with a…
-
Zyxel AP Unable to handle a simple bridge
Hi, I would like to point an issue that we were able to identify on two different Zyxel AP series (NAP102 and NWA5123) and probably exists on all Zyxel AP Here is how you can reproduce the bug : - Create a bridge on a router. It doesn't need to be a Zyxel one. We use an OpenWRT router for our test. - Put in 3 interfaces…
-
Wifi 6 APs connecting
Discovered on the WAX650S must have QoS on (WMM) else Wifi6 11ax will not work. Stations (users) fail to connect using the 11ax mode.