Problem with NAS326

Hi. Today I extracted my two hard disks from my NAS326 to read them via USB 3.0.
I was unable to read them from Windows (hard disks are formatted as GPT).
When I reinserted the discs, I could access the data the NAS began beeping continuously until I removed them.
I tried to update the firmware to the latest version available and now I can't access the files on the disks anymore.
How can I recover my data? Thank you

All Replies

  • workinto
    workinto Posts: 43  Freshman Member
    edited March 5
    Not recommend to pull out the disk while NAS power up.It may caused some problem to the disk.
    As I know, it could not read the file via the USB.
    Could you share what is the status of the disk on the NAS now?

  • Fabio64
    Fabio64 Posts: 2
    I removed the disks with the NAS turned off. I inserted only one (the disks are in RAID 1) and I see the 
    base folders of the NAS (admin, video, audio, photos) even with some data inside, but I no longer see the "work" folder
    that I had personally created and where were the other data. I found this guide:
    https://kb.zyxel.com/KB/searchArticle!gwsViewDetail.action?articleOid=013308&lang=EN
    but I'm afraid of losing files following it. What do you mean with "status of the disk on the NAS"?
    Thank you so much!
  • Mijzelf
    Mijzelf Posts: 1,578  Guru Member
    edited March 6
    Have a look in the shares menu to see if you can re-enable the 'work' share.
  • workinto
    workinto Posts: 43  Freshman Member
    If you're able to see the files in the disk, you can check the permission of the file.
Sign In to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click on this button!