NAS542 500 Internal Server Error on USB External Drive
sheshman
Posts: 6
Hi,
I've NAS542, updated to latest version and did a factory reset after it(i bought as second hand that's why deleted everything with factory reset), so when i connect my 4TB western digital usb hard drive through front USB port, i can see my usb drive on external storage, opening file browser and clicking to my usb drive, then it waits for 5-6 seconds and returns 500 Internal Error.
Enabled SSH and connected to nas through ssh to see if there is a problem with file system, but "ls -l" returns nothing.
All other services works jut fine and i can use my usb hard drive on my windows & linux computers without any problem.
Any suggestions?
I've NAS542, updated to latest version and did a factory reset after it(i bought as second hand that's why deleted everything with factory reset), so when i connect my 4TB western digital usb hard drive through front USB port, i can see my usb drive on external storage, opening file browser and clicking to my usb drive, then it waits for 5-6 seconds and returns 500 Internal Error.
Enabled SSH and connected to nas through ssh to see if there is a problem with file system, but "ls -l" returns nothing.
All other services works jut fine and i can use my usb hard drive on my windows & linux computers without any problem.
Any suggestions?
0
Best Answers
-
with your help,i've found the problem.Mijzelf said:So you have to run 'ls -l' in that directory, to see it there are any symlinks pointing out of the filesystem, or strange names, or ... .
As you can see on screenshot it was returning I/O error for one of the folders on USB Drive, so it wasn't an important one i deleted with rmdir command, now it works perfectly.
Thanks for your time and support.
0 -
If you have the possibility, do a filesystem check on that volume. Deleting that directory might not have removed all corruption.
0
Guru MemberAll Replies
-
Perhaps the USB power is not sufficient to supply certain size of external USB storage, or had you already plugged in the external power and still fail as well?0
-
good pointBlabababa said:Perhaps the USB power is not sufficient to supply certain size of external USB storage, or had you already plugged in the external power and still fail as well?
i don't think it's power issue because when i go \\mynasip i can see external usb drive and files in it 0 -
I find some post related.You can reference to these topic.0
-
Thanks Dexter,i already checked those subjects but no luck so farDexter said:I find some post related.You can reference to these topic.0 -
what is the output ofpwdls -lain the root of that mount?0
-
You are running 'ls -l' from the wrong place. The external disk is mounted in /e-data/<something>/ .0
-
oh sorry about that, i'm rookie on unix based systems.Mijzelf said:You are running 'ls -l' from the wrong place. The external disk is mounted in /e-data/<something>/ .
Here are the output of ls -la under /e-data
when i run ls it shows "90aa2d877a5254732fba90420060a799" i believe it's my usb hdd because when i "cd 90aa2d877a5254732fba90420060a799" and "ls" i can show my folders in usb drive
0 -
So you have to run 'ls -l' in that directory, to see it there are any symlinks pointing out of the filesystem, or strange names, or ... .0
Master Member
Ally Member
Categories
- All Categories
- 164 Beta Program
- 1.7K Nebula
- 86 Nebula Ideas
- 62 Nebula Status and Incidents
- 4.7K Security
- 236 Security Ideas
- 1.1K Switch
- 50 Switch Ideas
- 907 WirelessLAN
- 27 WLAN Ideas
- 5.3K Consumer Product
- 172 Service & License
- 294 News and Release
- 65 Security Advisories
- 14 Education Center
- 911 FAQ
- 399 Nebula FAQ
- 249 Security FAQ
- 90 Switch FAQ
- 100 WirelessLAN FAQ
- 18 Consumer Product FAQ
- 55 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 68 About Community
- 51 Security Highlight
Consumer Product Help Center
FAQ