Nebula Wifi Channel Settings not holding......

whitej4 · September 2022

Posted in error.

jpblanch75 · September 2022

Nebula_CSO said:

Hi there,

We are still checking your issue, however, it seems like the Zyxel Support function was closed after 21 days by default. Please help us enable again and choose "CSO account will be expired in:” as “Never” if you allow it.

By the way, if Nebula Wifi channel settings not holding again, please keep that setting and tell us, and then we could use the trouble shooting.

Thank in advance!

It happened again!!

Zyxel_CSO · September 2022

jpblanch75 said:

Nebula_CSO said:

Hi there,

We are still checking your issue, however, it seems like the Zyxel Support function was closed after 21 days by default. Please help us enable again and choose "CSO account will be expired in:” as “Never” if you allow it.

By the way, if Nebula Wifi channel settings not holding again, please keep that setting and tell us, and then we could use the trouble shooting.

Thank in advance!

It happened again!!

Thank you for informing us.
Please keep the current setting, it is important to us to do the trouble shooting. We'll contact you while we find the root cause out as soon as possible.
Sorry for this inconvenient!

jpblanch75 · September 2022

Please do it swiftly.

jpblanch75 · October 2022

Well, you guys have done nothing.... I left it on DFS and it set both my APs to the same channel! LOL

I'm back to set my own channel but, you need to fix this.

Zyxel_Judy · October 2022

Dear Customer,

We fixed this issue already. Please help us observe your site.

Thank you for your patience!

Wookie · January 13

I just found this thread because I have the same issue, my Site is called Dietikon, the Org is called Graf. I go to Radio settings, select manually a channel e.g 13 on 2.4Ghz and click save. When I recheck under Radio settings after a couple of minutes it doesnt change the channel.

This happens since like 1 month, before fixing channels worked flawlessly.

Image: https://us.v-cdn.net/6029482/uploads/editor/9o/39bfujcjznc8.png

Image: https://us.v-cdn.net/6029482/uploads/editor/zl/890re907253v.png

Image: https://us.v-cdn.net/6029482/uploads/editor/hv/gcgikm9osk2h.png

Zyxel_Judy · January 16

Hi @Wookie,

After checking your site and reproducing, we found that the channel shows wrong info, however, the symptom is not the same with the previous discussion in this thread.

We’ll fix this new problem and tell you.

Please refer to the channel info in Radio setting > AP list before we fix.

Thank you for this input.

Wookie · January 18

Hi Judy

many thanks, do you expect any other information from my side? As of now the info under Radio Setting looks as following:

Image: https://us.v-cdn.net/6029482/uploads/editor/81/c1b20j1jsicv.png

On the AP itself it looks like that:

Image: https://us.v-cdn.net/6029482/uploads/editor/p3/qvyqtbl7oa7q.png

Zyxel_Judy · January 19

Hi @Wookie,

The problem just happens when you select manually a channel e.g 13 on 2.4Ghz and click save. And then you recheck under Radio settings after a couple of minutes it doesn't change the channel, still shows "DCS" with lock icon. Note that the AP still uses the channel 13 as your configuration. We found the Nebula problem already. We’ll fix this problem and tell you.

When you choose channel is DCS (unlock icon) at the AP itself, there is nothing wrong.

Nebula Wifi Channel Settings not holding......

All Replies

Categories

WLAN Help Center