-
NR5103E input power range. Using Solar & Battery to power the router
Hi, my house are using solar panels with batteries for power generation. Can i know what is the NR5103E max input power range? Is it from 10.0v to 14.4v or how? i am planning to use the 12v battery to power the- 5G router but using a solar to charge the battery the power output of the battery will float from 11.0v (used)…
-
NR7102 drop connection on 5g nsa
Good evening, I have two questions about the NR7102. Firstly, I use it as a 5G Modem and then it provides a connection to the wan1 of the Ubiquiti USG, which does the routing. There are moments when it loses connection and it does not recover, only when it is restarted, which is annoying. I want to have control from within…
-
Power Suppy for NR5103 & NR5103E
Can Zyxel confirming which power supply correct for this hub. 12v 3amp output or 12v 4amp output? Because someone saying using 12v 3amp or 12v 2amp will caused 5G disconnection! 12v 4amp has solved the problem to stable 5G connected?
-
NR5103E firmware
The router is bought at tre.se (Sweden) the internet provider. I still have the router today but I have changed internet provider to Telia. Tre is the one providing firmware updates and i have to have tre to get updates. I have an issue where there is practically zero 5G at my router where it is. If i have my cellphone…
-
NR5101 without nebula
Hello everyone I have an Lte NR5101 no nebula router, I need to expand my wifi6 wireless network, what type of device can I associate with the router to expand the wifi? Thank you all
-
LTE5398-M904 LTE module update
Hi, there has been discussion about the newer version for LTE module. Someone has pointed to netgear's site. Are you planning to release newer version of it? EG18EAPAR01A08M4G—>EG18EAPAR01A11M4G
-
NR7101 and Zyxel Air App android.
I've got a new Zyxel NR7101, it's been excellent for about 6 weeks since I installed it. Last night started getting slow speeds like 6Mbps download and 15Mbps upload, I was previously getting over 100 down and over 50 up. So I went to connect to it's AP with zyxel air app, it informed me there was an update, so I updated,…
-
Nr7101 poe injector protocol
My poe injector that came with the modem broke. I am looking for replacement. Is an af protocol enough or do I need an at injector? Also will an injector following both protocols work in this case ? Thanks
-
NR 7102 Remote connection
Hi im thinking if its possible to have a free service like noip in my router to login from any where easy, Because i tried with noip but didnt work Im using 5g sim so i have already always internet so i want access from anywhere.
-
NR7102 no signal 5g
I just installed the device but it does not detect signal 5g However, when I test with a mobile phone(iphone 13 pro), it detects signal 5g Why is this happening? Does it not support any frequency? The use is in Greece and the provider is cosmote
-
NR7101
Hello I'm considering purchasing a NR7101, and I had some initial setup questions, once installed I would like to use the Nr7101 in Bridge Mode and use an Asus router for Wifi is this possible? And if so how is this done?
-
Postman is not connecting
When we try to send a Get request as refered in the configuration documentaiont for the cloud managed router, it returns : "message": "404 Not Found: The requested URL was not found on the server. If you entered the URL manually please check your spelling and try again.", "status": 404} we followed all the steps in the…
-
LTE7490-M904 troubleshooting
Hi there! I just wall mounted a LTE7490-M904 in my mountain house using a SIM card by TIM (Italian ISP) and everything works fine on the control panel. I can perform ping and speed test as well with promising results. As soon as I try to configure a Google WiFi AP using the LAN cable, it detects no internet connection. I…
-
SNMP MIB for NR7101
Is there a MIB out there for the NR7101? Have enabled SNMP, and I can successfully monitor network data, but was wondering if I could als get some hardware health data.
-
NR7101 network statistics.
I have an NR7101 and when I got to the Traffic Status page the numbers I see there do not make any sense. The counter of received bytes over the WAN network reads over 1.6 TB, and this only after about 15 minutes. That is impossible. I am not pulling that much data. What is going on here?
-
Zyxel NWD7605 on Linuxmint 21.1
Hi, I've just acquired a Zyxel NWD7605 USB dongle to use it on a PC with Linuxmint 21.1 OS. I've downloaded the Linux drivers from you site, but I'm not being able to compile it with the script provided. Any special configuration I have to apply on the Makefile or any other component? Regards,
-
How to automatically reboot the NR5101 by schedule
Hi I would like to reboot my zyxel NR5101 at 05.00 AM every sunday morning. I have found some shell commands like : ***************************************************************************** As example the following for a reboot: Login into the Zywall/USG via console/telnet/SSH. Enter the following commands: configure…
-
Zyxel NR7101 Bridge Mode: Can't ping local Router from the Internet
Hello, I am setting up a new Zyxel NR7101 mobile 5G router which I ordered twice for 2 SIM card connections. I managed to get Wireguard VPN running since I'm receiving a public IPv4 address, but I can't ping my local router which is a Unifi Dream Router (UDR). My setup: Mobile connection provider is "Telekom" within…
-
How to update software correctly
Сan I update the firmware for Zyxel LTE5388-M804 immediately to the latest version or I need to be updated sequentially to previous versions?
-
NR5101 can't ping from the WAN side
Hi I have setup a NR5101 and it's working connected to a pfsense as NAT not bridge. I have the pfsense IP in the DMZ setting. Problem is I can't reach anything from the WAN side, even ping doesn't work. Supposedly having an IP in the DMZ should direct all traffic to that device unfiltered. Well, it doesn't. What could be…
