-
Set up of VPN in IPAD Ios system for Zyxel NAS326
Hi all, Does anyone know how to set up the vpn of my ipad for Zyxel NAS326?
-
NAS326 Problems
I have a NAS326 had a folder I created, My Documents, which I had mapped to a drive letter. Two days ago the nas326 started beeping and of the led for drive 1 was blinking. Error message showed that the mapped drive was not available. I got into the nas326 clicked on Storage Manger and it showed there was a problem and…
-
freeze NAS542
Hi ! after playing with debian I get a freeze NAS (connected the console.The NAS keeps trying to boot from /dev/nand0.kernel2.bb and hangs externally. I break the loop from the console and type "bootm /dev/nand0.kernel1.bb" . the first Linux is loaded, but also with nand errors, and then a reset by watchdog follows.But…
-
Disk Replacement - NAS 540
Hi, I changed the drive in the NAS. The new drive works, there are no problems, but in the NAS it is incorrectly recognized when it comes to capacity. The new one has 8TB. How to resolve the issue of incorrect display of disk size?
-
Nas 540 broken after power-outage
I had a power outage and after this incidend my NAS 540 kept beeping. Then i wanted to try to fix the NAS by using Mijzelf's RescueSticks (Thank you at this point for all the amazing work you are doing here). After that it didnt boot at all. On debugging with a serial connection i was able to see that i get a "Bad header…
-
Upgrade disks in NAS320S
I have a NAS320S and want to replace the 4tb disks with 8tb disks ... I don't want to save what lingers on the 4tb drives because that data has been copied off ... I simply want to replace the 4TB with the 8TB drives ... Can I simply shutdown the NAS, remove both old (4tb) drive, then insert the 8tb drives and power up the…
-
Transmission has stopped (NAS 326)
Hello; I have the Transmission app on my NAS 326. However, it doesn't work for a couple of days. Any solution for this?
-
Will NAS540 and APC 700VA with PowerChute USB port support Auto Shutdown?
Hi I'm considering to buy new UPS for my NAS540 model and just found out the Auto Shutdown function when the UPS capacity lower than designed percentage and I found APC 700VA model with PowerChute USB port so will both devices are compatible? can I use Auto Shutdown function?
-
NAS 325 auf 2*4TB aufrüsten
Hallo alle, ich wollte meine NAS325 auf 2*4TB aufrüsten. (Bisher 2*1TB). Erste Platte raus und 4TB rein. Volumen repariert. Hat alles funktioniert. Nun die zweite alte Platte getauscht, aber das NAS sagt Volume down . Kein Möglichkeit zum Reparieren angezeigt. Jetzt habe ich beide alte Platten wieder eingebaut und Volume…
-
NSA325-V2 & macOS - very unstable
I'm trying to copy files from my Macbook Pro (16-inch, 2021 with M1 Pro processor and macOS Monterey version 12.6) to a share on my NAS but the process aborts after some time (it manages to upload about 1GB). All mounted shares disappear and I have to remount the shares again. Anyone knows how I fix this? Everything works…
-
NAS542 Raid1 config, HDD:s not accessible
Hi, I think I have a serious problem with my NAS542. One day it worked fine and the next day it was not accessible. There is a crackling sound from the HDD in position 1 and the server constantly tries to reboot and shuts down and starts all over again. The HDDs never show up on the NAS542 Desktop so I have not been able…
-
NAS 540 won't boot
Hi, My NAS540 won't boot properly and I have hooked up the serial port and exported the bootlog. Can someone please help me fixing the problem? Any help would be greatly appreciated, since I am quite new to this. booting kernel of type uimage from /dev/nand0.kernel1.bb Bad Header Checksum Failed. booting kernel of type…
-
NAS 326 - scheduled power off during torrent download
Is it possible to use the scheduled power on and off options when the download machine is running? Or I risk losing data or making the NAS malfunction when restarted?The previous NAS wanted me to stop the download before shutting down, but so I couldn't take advantage of the scheduled shutdown. And now given the energy…
-
NAS542 static route
Hello! I have a nas542 device. It has 2 ethernet ports. One port (LAN1) is connected to the Internet. This is the default, so I can access the device remotely. The other port (LAN2) is on the LAN. The IP address of the LAN-side interface, e.g. 10.10.1.5/21. The device is accessible from this LAN. However, we have…
-
Record videos from camera
hello everyone, I have a nas326 and I would like to record videos from wifi / LAN cameras. how can I do? i have IMOU cameras. thank you all.
-
NAS540 No longer network addressable
I front-panel powered down my NAS540 (power button, single beep, release). Device shut down properly. I swapped the power from one UPS to another and repowered the device. I have network lights at the switch (with activity) but it is no longer accessible via IP address. I've verified in pfSense that there is no new lease…
-
NAS326 vrátit zpět verzi firmware
Přestala být funkční utilita "NAS Starter Utility" a to jak u OS syst.Win 10 verz.21H2 build 19044.2006 i Win 7 -již nepodporovaný syst. Přihlášení do NAS326 je jinak funkční přes síť.adresu nebo jinak. Díky
-
during the firmware upgrade the nas326 is stuck
During the latest firmware upgrade (NAS326_V5.21(AAZF.8)C0) it starts and at 10 % it doesn't go further . It's 3 hours now in the process. If i go to the panel, which is extremely slow, i can see that the cpu usage is 100% and if i try to restart, reset i receive a message like "cannot, doing firmware upgrade ". the system…
-
I have a zyxel nas540. It's occurred a problem that I cannot reached nas device IP.
It's ok led's on device. But I cannot ping nas IP. Probably device not assigned IP. I've scanned network scope, but not founded any IP. I've just reset device (back to button etc.) but problem has continu.
-
Upgrade disks on NAS520
This might not be the correct area of the forum to post this, but it's the closest category that I could find. I want to upgrade the disks in my NAS520 from 4TB to 8TB. It's currently set up as RAID 1. What's the best way to do this? Kev
