-
NAS326 - FW Update Fail?
I just tried to update the FW on my NAS326, and I think I did a boo-boo while trying to update. I clicked on the link (http://nas326) while it was stuck at 99%. And now I am getting this every time I log in. How do I fix this problem?
-
NAS326 System LED flashing, no access though Network
Hi, After power failure, my NAS326 system led is flashing constantly and I cannot access it through the network or detect through the utility. I haven't initiated a FW update. How can I login again? I have tried power-cycle and unplugging-plugging the power. Please advise. Thanks!
-
NSA-220 Plus - no HDD recognized anymore
Hi! I have an old NSA-220 Plus, started again a couple of weeks ago without any troubles. 2HDDs with 3 TB were running and data was stored as a backup. Then took it off the lan and power. Some days ago I started it again and from this point on, the NAS wont find any hdds anymore. I tried to plug the HDDs in and out, even…
-
NAS326 du is showing less used than df
My NAS326 is almost full. df indicates 3.4T used from 3.6T, but du indicates 1.4T used. Why the difference? #NAS_Sep_2019
-
NAS326 needs to use a more recent version of busybox
I bought a NAS326 last week to serve as a backup for the most important data on my TrueNAS. I have updated the NAS326 to the latest firmware release - V5.21(AAZF.10) As I was loading data onto the NAS326, I discovered that the 'du' command was showing an incorrect size when checking how much had been copied to a share. I…
-
NSA325v2 Data not accessable
Hello i have an old Zyxel NSA325v2 with 2 SATA disks and RAID1. Now one of the drives is broken. I have now the problem that i cannot access the data of the first disk. What i have to do to get my data which is on disk1? Is it anyhow possible to take the disk which is ok and connect it over SATA Adapter to an Windows 10…
-
No files or media visible in music/photo/video
NAS542, FW V5.21, Twonky server 8.3-19 Not sure when/how the problem started, but I do not see any media in my music/photo/video shares. And consequently can't see any media on eg my TV. In filemanager all files are visible and accessible. Checked the twonky server (which is enabled) and it gives eg…
-
NAS326 extremely slow all the sudden.....
Hi! I have had this nas for a couple of weeks now, and I have been transferring 35-45GB at a time, several times. and I think that has taken 15-20 minutes. But now all the sudden it says its going to take 18 HOURS!! I haven’t changed anything, and I did a restart of the nas as well as my computer....but it still says 18…
-
Entware: update package list
Is entware still updated? opkg update Downloading http://bin.entware.net/armv7sf-k2.6/Packages.gz Updated list of available packages in /opt/var/opkg-lists/entware Downloading http://zyxel.diskstation.eu/Users/Mijzelf/Entware-ng/binaries/armv7/Packages.gz Updated list of available packages in /opt/var/opkg-lists/Mijzelf…
-
NAS326 How long to format 12TB hard disk?
I have just purchased a NAS326 to use as a backup device for my main NAS. I have added a 12TB Seagate IronWolf Pro drive (ST12000NE0008). How long should it take to format this drive so that I can create a volume on it? It has now been about ten hours since I started the format and it is still running.
-
Install VFS Samba module on Zyxel NAS540
Hello, How can I install a VFS Samba module on NAS540? I need to use the dirsort module. But when I try to use I get the following error(Samba log):Error loading module '/usr/lib/samba/vfs/dirsort.so': /usr/lib/samba/vfs/dirsort.so: cannot open shared object file: No such file or directory
-
Zyxel Auto Repair deleted all files
I had 2 disks in a RAID config working as a mirror for each other to prevent possible failures. One day, my NAS 326 started beeping out of nothing so I followed the steps below: 1. Pressed the reset button 2. Went into the Admin area and checked if the disks were ok. There was a message saying one of them was "degraded" so…
-
Multimedia player for .mp3 on the NSA310s
Hello, community. I`ve exploring my "new" 310s and I`ve stucked on the multimedia. The idea is, that if it is possible, want to stream .mp3 files without need to download it. Should I try some browser add-on like WMP or VLC? I`ve tried both, but nothing comes out of it. How can I listen my music via streaming, without…
-
My NSA325-V2 isn´t visible in MyZyxelCloud
Hello guys, First time here so hello everyone and sorry for any dumb questions i may post here. I'm running this NSA325-V2, FW 4.81, and so far I'm very pleased with it, been working flawlessly since I have it so I'm not willing to put it away while it works really good for my needs, and also for many users as far as i can…
-
NAS326 HTTP Stopped after cert upgrade
Hello, I went to update the certificate for secure communications and the NAS 326 no longer is working with the web client. I am able to SSH in to the box, but unable to find the reset script. So I either need to reset the box from the CLI or fix the HTTP to work with the certificates. Any thoughts on this process ? Oh and…
-
samba shares control through ssh commands
Hello I`ve boght NAS 326 and now got a task to transfer all our company files to it. No problem, users and shares - created via ssh. But there are options to enable the share and its access rules, just adding strings to smb.conf doesn`t solve the problem. Each user has a share so clicking "enable" and putting rw-flags in…
-
Issues with firmware V5.21(AAZF.7) on NAS326
Hi, After installing firmware V5.21(AAZF.7) on my NAS326 there are some issues: 1. password broken after reboot -> passwort reset works but the NAS dosn't accept passwords with "#" in there 2. RSYNC that uses normally the admin password is not working with the new password (and not with the old one) is there a solution to…
-
Replace NAS 326 after an electric failure
Hi everybody, I have a NAS 326 with two 2TB discs working OK till 2 days ago. An storm has burnt the mother board of the NAS. The question is: Can I buy another NAS326 and insert the two discs in the new NAS326? How can i access to data in my two 2TB discs? Thanks. Edu
-
NSA325 opkg TUN driver?
Is there a TUN driver/kernel module for this NAS running with Entware? Thanks
-
Connection problem with backup rsync from NSA520 to NSA325v2
For two years, the backup was performed via rsync, run from the NSA520. Data was transferred from the NSA520 to the remote NSA325v2 without any problems.After replacing HDDs in NSA325 with new ones and setting shares, I cannot create any "rsync" or "synchronization" backup job in BackupPlanner because there is an error in…
