-
Data link protection
how to restrict users with usg210 next-gen from downloading big files?? for example i want to set a rule to restrict users not to downloading files exceeding 10MB in size.
-
Zyxel USG 110 slow exclude with AntiSpam filter...
Hello everyone. I have a USG 110 security device and this is data: Model: ZyWALL 110 FW: V4.30(AAAA.0) My Internet speed is: 80Mbit/s (totally tested with file downloads) With new FW i have saw vey slow worked exclude traffic with SpamFilter only. This is so strange, because inside AntiSpam filter i had disable all…
-
USG 110 - clear port statistics
Does anyone know the CLI command to clear port statistics - in our case Ethernet Port5? I think it along the lines of interface reset however cannot get the correct syntax.
-
configuration reload
After replacing my faulty SBG3300, I had difficulty loading the previous configuration file. Is it necessary to first restore the previous f/ware version for compatibility?
-
ipsec disconnect
Hi, have configured an ipsec tunnel between Usg 1000 and USG 300 firmware(3.30 AQE.7 ITS-WK48-r74988).Approximately once a week , the tunnel breaks and does not rise until both gateways disable-enable VPN Connect(Phase 2).There are no errors in the gateway logs.
-
Adding an address to a group
Hi have a device of ZyXEL Zywall 310 firmware 430AAAB0ITS-WK10-r82493. Added a group of addresses that is used in Policy Routing. If you try to add host addresses to this group, you receive an error. If the address group is not used anywhere else, then the host addresses are added to it.
-
Can't manage to connect to L2TP/IPSec VPN with built-in Windows 10 client
I've configured a L2TP/IPSec VPN tunnel (USG20W-VPN firewall), with default options. I can connect with no problem from an old Windows 7 PC, but I cannot with Windows 10. The client configuration is the same in both cases: preshared key and PAP protocol. I'm wondering if Windows 10 requires any additional step.
-
slowed SBG3300
After 12 months of complaints to ISP and BT Openreach (UK line providers) and cleaning household electrics etc, I finally swapped my SBG3300 for a new one. Same f/ware and configuration. Download speeds went immediately from 33Mb/s to 48 - 50Mb/s and VOIP phones had weather app working for 1st time! Does anyone have an…
-
MAC Blocking
Hello. Need a permanent solution to block the MAC IDs for particular devices. UAG2100 couldnt enter into the bridged routers to block the MAC IDs
-
gateway remote on vpn site to site
Hi, I have a ipsec vpn site to site active from site1 172.21.0.0/24 to site2 172.17.0.0./24 I need for one computer ip 172.17.0.10/24 on site2 to get internet from gateway 172.21.0.1/24 to exit with router on site1 help me, thanks sorry for my bad english. Marco
-
Updated 3G/4G dongle list - USG 210
Is this still the latest 3G/4G dongle list for ZyWall USG Series - 17 Jan 2017: https://www.zyxel.com/solutions/solution_detail_20140402_405106_tab3.inc This list is over a year old now so hoping someone knows where to access the latest list that suits our USG 210.
-
vpn between LTE6100 & USG40w
Hi. I trying to establish an IPSec IKE1 Site-to-site with Dynamic Peer VPN connection from LTE610 to USG40W I'm sure that all settings on USG40W are right. No errors on USG - he doesn't see any attempts to connect from LTE6100. I have tried to make the same type connection between LTE6100 and Keneetic Giga III - same…
-
DHCP over Site to Site VPN (USG40 - USG40)
Hi, i have two USG40, one in the office and one home. Site to Site VPN is function ok, but i want to have the PC at home to get IP from the USG40 at the office since that is running DHCP. I have set DHCP relay on LAN1 on the USG40 at home to point to the LAN1 ip at the USG40 at the office. USG40 Office LAN1 192.168.1.1/24…
-
SafeSearch is not working
I have enabled the option "SafeSearch" on a profile in content filter. When i assign this profile on Policy control, all filters works propertly but Safe Search dosn't works.
-
USG 210 HTTP to HTTPS Redirect
There is an option to modify the internal redirect? Normally now the usg set ip address in case of redirect, is possible to set the FQDN name of usg? Now the redirect string is https://192.168.1.254/redirect.cgi?arip=fw-epf1.xxx.lan&original_url=http://fw-epf1.xxx.lan/ is i digit http://fw-epf1.xxx.lan i expect to be…
-
Netgear 341U USB Modem for WAN
Has anyone successfully used this modem with a USG? If not, what recent USB modem have you successfully used? The Zyxel spreadsheets are kind of outdated.
-
SecuExtender suddenly not able to connect to USG40
we use since a while a secuextender to connect from a PC, through the internet, to a USG 40. Today it stopped working: if one tries to connect, it says like this: 1) after pushing the connect button, it appears (as always) a window saying "this connection is untrusted" (it is a matter of security certificate, that I did…
-
how to restrict downloading big files ?
how to restrict users with usg210 next-gen from downloading big files?? for example i want to set a rule to restrict users not to downloading files exceeding 10MB in size.
-
USG110 IPsec/L2TP VPN using Windows10 Client
Hello, I using a USG 110 unit and installed with the wizzard a L2TP VPN. My USG is behind an "LTE Cube", I forwarded ports 500 and 4500 to the WAN port of the USG. I have no possibility to turn off the "LTE Cube" router or NAT to work only as a modem! In Windows10 I configured an VPN Client VPN Type: L2TP/IPsec, Key (same…
-
IKEv2 and Radius
Hi I have found a nice guide for IKEv2 http://onesecurity.zyxel.com/img/uploads/Next-Gen_IKEv2_VPN_Server_Role_CR.pdf but that utilize local users and not radius server. Are there any guides of how to get that working? I managed to setup radius for l2tp, but those settings do not work for IKE, I just get different…
