-
LTE3302-M432 Battery
Hi ! I just bought one of theese LTE3302-M432 And it does not come with a battery, and I would very much like to get one for it. However I can't seem to find any information on what kind of battery i need other than these 3. Removable lithium-ion polymer battery 3.8V, 2800 mAh Up to 4 hours operating time (depends on…
-
Very weird problem
Hi, people. I have been struggling with this problem for about a week now, and I don't know what to do! We have a VMG8823-B30B router in our home network and it works fairly well. We have a Sony Smart TV with Android with wired connection and three phones, a few laptops and an iPad using the wireless network. Since March…
-
Why VGM3927 does not work as well as VGM1312?
Hi! I used a Zyxel VMG 1312 DSL (Download 15 Mbs / sec) internet
connection. I renewed my contract with Orange for Dawnload 50Mb / sec. With the
VGM 1312 router, I measured a speed of 47 Mb / sec. I considered this a good result. Orange supplied me with a new VGM 3927 router and problems
started. The router could not…
-
Zyxel is disconnecting wireless LAN every 9 or 10 minutes
Zyxel VMG8623-T50B is disconnecting wireless LAN every 9 or 10 minutes
-
AMG1202-T10B ADSL2+ router firmware update
Got this router from a local IT shop as used cheap replacement of my old brocken router.So far always worked well, but was tryng to use the scheduler so to shut off the wifi during the night.The UI differ from the user manual since there is no possibility to select the State On/Off in the rule setup. Reading the firmware…
-
P874 cannot forward port 80
I am using P874 router. And it was able to forward port 80. But, recently it cannot forward port 80. Other port forwarding is OK. This are my port forwarding and server (iis) setting. I try every iis WLAN association.
-
Port forwarding not working.
For some reason, this port is not being forwarded correctly. Even though It's set up perfectly, Please help. I'm on the latest firmware, and have a VMG8825-T50 router.
-
VMG3925-B10B Firmware update
I would like to update the firmware on my VMG3925-B10B router. I followed the instructions however the Firmware selection in the Maintenance menu is just not there in the list. What's going on? #SP_May_2020
-
VMG1312-B10D seemed to lose its config, such that CHAP authentication failed for the WAN.
Hello, MY VMG1312-B10D with firmware V5.13(AAXA.10)C0 has been working well. I needed to turn it off for 7 days. When I came to turn it back, it would not connect the PPPoE connection over VDSL, as it reported a CHAP authentication failure. See syslog extracts below. - VDSL came up fully though. 21/05/2021…
-
experiencing irregular drop out -router? settings? can router help diagnose source
Hi I have had our internet supplier investigate the drop out issues. They have installed a monitor onto our home network that has told them its not the fiber supply that is the issue, it is something our side. The drop out occurs around maybe every 8 mins for couple of seconds though sometimes it can be ok for half hour or…
-
firmware update file for Zyxel VMG1312-T20B router
hi, I have a Zyxel VMG1312-T20B (Wireless N VDSL2 Gateway with USB) router. problem is i can not find it's updated firmware file on the Zyxel website??? thanks in advance. #SP_Jul_2019
-
Web interfacce Transmission with Android
why if I open Transmission with an Android device it doesn't give me the possibility to choose a file but only web url?
-
VMG3625-T50B Root-Supervisor accounts.
I have a VMG3625-T50B modem, but some menus are hidden. I want to use all its features. Firmware Version V5.50 (ABPM.2) G0. How do I access root and supervisor accounts?Thanks.
-
VMG8825-T50 incorrect dial tone
Hi,Is it possible to set correct VoIP dial tone for Czechia on VMG8825-T50? The device is EU version, not customized.Region Setting CZE - Czech Call Service Mode Europe Type, but the tone is wrong.When I set Region GBR - UK I can hear correct UK dial tone!Czech dial tone is atypical, it is repeated Morse letter A (330 ms…
-
VMG1312-B10D wake on lan?
Hello,I have the VMG1312-B10D as my home router. I definitely don't want to replace it with anything newer since it works more than fine for what I need. However, I have a special need. Due to poor electricity network in my area, UPS is not able to keep my home server up and running for the whole power-out duration.…
-
[VMG5940-T20k] I need the user and pas for configuration login
Hello my modem is A :VDSL Model VMG5940-T20k Firmware: 2.00(ABMS.0)b5. #SP_Oct_2019
-
VMG8825-T50K printserver doesn't work
Dear all, I can't print on my HP LaserJet M14-M17 when usb-connected to my router. As you can see from screen the printer identification is OK, but I cannot add or see a printer on http://192.168.1.1:631/printers/Z_PRINTER What is the right way to do it? Thanks in advance
-
Zyxel C1100Z modem web site blocking question.
Blocking
access to a website at the router does not block streaming audio
coming from the blocked website. Is this normal behavior? Example: When I
block auracast.net at the router, any attempt to access auracast.net
via browser returns a “blocked by Zyxel” message. With block
still in place, on same browser, I can play…
-
Public static ip class on XMG router VDLS
Hi. I have a XMG router with a static IP. I requested to ISP 8 static ips. How can i setup these Ip ? I think in additional subnet ? Thanks Gianluca
-
Configure persistent xDSL settings on VMG4005-B50B
I need to configure an ADSL connection to use Annex L on both lines on a VMG4005-B50B. Right now, using `xdslctl configure -mod e` I can configure line 0 to use RE-ADSL2 Annex L, but the setting does not apply to line 1 and is reset on reboot. How can I make this setting persistent and apply to both lines? Unfortunately, I…