-
How to import configuration via SFTP?
Hi guys, I would like to upload configuration files to my XGS2210 switches (firmware 4.50) via SFTP but I can't figure out the correct way to do this. Example: I back up a configuration from a switch via SFTP: $ sftp admin@1.2.3.4 admin@1.2.3.4's password: Connected to 1.2.3.4. sftp> get /config…
-
Jumbo Frame XS3700-24
Bonjour, Est ce qu'il y a une configuration spécifique a faire pour utiliser des jumbos trames sur un XS3700-24, ou est ce que cela se fait automatiquement ? Par avance Merci de vos réponses.
-
GS1900 and GS1920 config backup to tftp with snmp commands
Hi, I'm looking for a way to backup the config of GS1900 and GS1920 switches to tftp with snmp commands. In the zyxel knowledgebase i found an article which exactly discribes what i am looking for. But this instruction is for the ES3500 platform.…
-
Can't connetc to webinterface of GS1100-16 ethernet switch
I have installed my new Zyxel GS1100-16 ethernet switch and it's working fine.But when i try to access it with firefox or edge at 192.168.1.1 it just keeps loading.I'm directly connected to the switch over the number 3 port.Why can't I access the webinterface? #Biz_Nov_2019
-
Where can I get a power supply for a GS1900-8HP
I have a GS1900-8HP that was taken out of service and the power supply was lost. I wanted to use the switch again. Anywhere that I can get a replacement power supply? I am in the US.
-
Mac adress forwarding
Hello, Question from my boss , Are switch configured, so that users can’t connect own home computers? I have ZYXEL GS1920 48 ports and I would like to refuse any connection other than computers in my network. (by mac adress) So , I think that I need to use Mac Adress forwarding but I would like to not use port number…
-
Problems getting guest WiFi on VLAN Setup
Hey all, I'm new to Zyxel switches and need help with a VLAN setup. I'm having issues getting guest Wifi working on a VLAN. Let me post my setup below. Two Unifi AC LR AP's Guest WiFi tagged with VLAN 200 Zyxel GS1920-v2 3 ports on VLAN 200, trunked, tagged, fixed Sophos XG 115 Traffic is allowed from AP's to interface…
-
VLAN Switch Uplink
Hi there, Having issues with some Zyxel switches. Its a pretty simple setup. Two Zyxel switches with IP phones plugged into them. These IP phones have PC's plugged into the phones. I have the Zyxel's voice VLAN setup correctly so that the phones are getting automatically assigned the correct VLAN and the PC's are getting…
-
GS1200-5 changed hardware mac-address in the LAN by itself
My LAN consists of 2 GS1200-8 and 2 GS1200-5. At the beginning, all works fine. Now, I get an loop indication on one of them. It seem, that one switch takes over the mac from another switch. Now there are two switches with the same hardware mac. Reset on Factory Settings did not help. I also installed the firmware again,…
-
GS1900 custom https port
Hi, is there a way to change the https (443) port to another ie: 8443
-
Zyxel GS2200-8 don't boot
Hi, I have an issue I have a Zyxel GS2200-8 that does not boot anymore. The sys led sys is blinking alternately. By connecting to the serial port, here is the message in "loop" : Exception occured! EPC= 0x8015ED68 SR= 0x00007F03 CR= 0x50808008 $RA= 0x24A5FFFF TLBL Abnormal Stack Task List : NONE…
-
Does Switch models XGS4600-32F and GS2210-24HP support IGMP query solicitation?
Hello, I would like to know if the Switches XGS4600-32F and GS2210-24HP support the IGMP query solicitation feature? Thanks in advance. Best Regards, Caio.
-
Trunks, VLAN, and uplinks.
Hello. I'm coming from an HP/Cisco background but I'm running into issues getting this GS1900-10HP switch connected to my network. For this switch I'm concerned with three VLAN. VLAN 1 - Default VLAN, the switch has an IP on this VLAN. VLAN 60 - VOIP VLAN. VLAN 150 - DATA VLAN. The switch works fine connected to my HP…
-
Does GS2210-24HP support IEEE 802.3ac?
Hello, I would like to know if the Switch GS2210-24HP supports the IEEE 802.3ac protocol? In the product datasheet it says one of the Standard Compliance features is the IEEE 802.1Q VLAN tagging protocol. Since the VLAN tagging function is often associated with the IEEE 802.3ac protocol, does this means the GS2210-24HP…
-
GS1910-24 and GS1920-24 losing configuration
I am mildly disappointed and slightly irritated. Some years ago, I purchased a used GS1910-24 switch. Soon after purchase I realized that it worked perfectly except that it lost its configuration at every reboot. Back then it was not an issue for me, as I had nothing I needed to configure in it. Recently I had to be able…
-
Quick overview videos of Zyxel surveillance switch!
Zyxel’s new Surveillance Switch is
designed with specialized hardware and software features for surveillance
applications in mind. Its three major unique features: Extended Range Mode,
Auto Camera Recovery and Continuous PoE bring clear benefits to
surveillance vendors for easy installation, truck-load reduction, and…
-
GS1200-5 strange behavior
Greetings, I followed the user guide and created VLAN2 ont port 1. Then I created PVID 1 => VLAN 2 => Port 1 If I repeat say for vlan 3, PVID 2 => VLAN3 => Port 2 - It crashes. I need to reset et start again.Tried on Mac, PC and now on Linux via Firefox The firmware is: V1.00(ABKM.4)C0 Is there a workaround please? I am…
-
Vlan GS1920
I have two GS1920 switchs and I am trying to segregate into 3 seperate vlans. The vlans have been created on a GS1920, I have 2 DHCP servers från differents routers. I wish to connect the router to the switch along a single port (24) in the switch and then send it to from port (4) to another switch port (2) which should…
-
Is there a way to configure 802.1x mac based on a GS1920?
Hello everybody! I need to enable port authentication on our GS1920 switch, we're needing to use mac based authentication on a radius server like what is explained on this KB aricle for GS1910: https://kb.zyxel.com/KB/searchArticle!gwsViewDetail.action?articleOid=002789&lang=EN is there a way to do it on GS1920? Can…
-
zon utility GS 1910-24 hp
My issue: I manage an apartment building in which the network systems were setup prior to me being here. The zyxel 1910-24 was working fine, but I had no reason to access it, which I was left no info at all on any of the IT stuff. A thief ripped out our router. Now that I have replaced the router, the switch is not…