Connection troubles with NR7101 after every 24 - 48 hours

Noddy · January 2023

Have you tried turning on "Network Monitoring" within Network Setting > Broadband?

Network Monitoring periodically checks connectivity and provides connection recovery.

Thanks.

sysjohn · April 2023

https://community.zyxel.com/en/discussion/comment/41458#Comment_41458

Same here with LTE5398-M904 and V1.00(ABQV.3)C0.
Full reboot is necessary for the connection to come up. After the CellWAN changes the IP (after 24 hours) it stay in the "kern.debug udhcpc: Sending discover..." loop forever.

SELBERG · April 2023

Try another ISP.

RisTo · April 2023

https://community.zyxel.com/en/discussion/comment/50626#Comment_50626

https://community.zyxel.com/en/discussion/comment/50636#Comment_50636

This. My problems were solved by changing to strongest signal (another ISP).

Haarvat · July 4

https://community.zyxel.com/en/discussion/comment/39446#Comment_39446

Hi Selberg
What Switch are you using to POE your NR7101?
You giving it power and recieving 5G? Have been looking for a solution for this for a long time.

Thanks

SELBERG · July 4

I use unmanaged PoE+ switch, not a Zyxel and yes, receiving 5G.

NR7101 need less than 30W and also my outdoor wifi unit so it is enough for me.

When connecting a PoE+ unit 2 leds light up/port and only one led if the unit don´t need power….

PoE+ (802.3at):This standard provides up to 30 watts of power per port.

PoE++ (802.3bt):This is the latest and most powerful PoE standard and provides up to 100 watts of power per port.

https://www.zyxel.com/global/en/products/switch

Connection troubles with NR7101 after every 24 - 48 hours

Comments

Categories

Consumer Product Help Center