-
MULTY set up, adding new device: light keeps turning red instead of blue
Hi I successfully set up our first device, and now we want to add another multy. I followed the steps in the app, but then i get to a step where i should "wait for up to two minutes until the light turns blue" - this never happens, and it blinks for a few minutes before turning red. I have checked connections, turned…
-
Multy X App "disconnected"
Just got my two Multy X's, and everytime I try to set the up I get the same problem. What happens is that after the first node is set up (and is working fine) it asks me to add another. If I try to add another it gets stuck trying to sync with the second one (never getting done). If I at this stage force close the app and…
-
Running PiHole with Zyxel Multy X Wifi has certain issues.
Virgin Media Superhub connected to the main Zyxel Multy X in the lounge's WAN port in modem mode. There are 3 other Multy X devices operating as WiFi access points across the house. One of these is plugged into an Ethernet port in the study and has PiHole installed on it. I have DHCP Server turned off and a static IP…
-
Multy AC2100 - no internet
Hi there - I try to get our repeaters going for days now. If I make it to the app process without it freezing, always the same happens: The network is there but no internet. Multy is red. We use a Speedport as Master. And want to set up two Multys as repeaters in the same network. Once I connected it to the router and…
-
Multi X and Mini
Hi, I have a Multi X and Multi Mini in a daisy chain configuration connected wirelessly. On the X which is wired to the modem receiving the fibre line I get 450Mbps on 5G Wifi, but on the mini which is located in my office I only get 100Mbps. Is there a setting to change this?
-
Multy U app stuck connecting
Hi, how do I reset the whole network at home? When I login to the app, it gets stuck connecting. I cannot delete multies. The problem arose when I reinstalled the app because it did not properly communicate with the nodes, I was getting false info - when one of the nodes was offline, the app did not show it. So I…
-
Vpn on a Wsq-50
Does the WSQ-50 support vpn-tunnel?
How should I do?
Intending to use Nordvpn
-
What is the best mode to use my 3 Multy Xs provided that my gateway is a ZYWALL 110 /switches ?
Zywall 110 feeds switches that provide ethernet backbone for a 4 story house . My 3 Multy X are needed only for wireless . Right now they are connected -1 primary via ethernet the other two connected wireless . Is there any better way ? (speed and coverage)
-
How to manage multi x in bridge mode?
Hello! We have WSQ50 and want to use it in bridge mode.Once we switched it to bridge it acts like bridge, but we lost an ability connect to it using application and so we can't manage it. How to manage multi x in bridge mode? Thank you!
-
Where can I buy the mouting accessory for Multi X AC3000?
Where can I buy the mouting accessory for Multi X AC3000? I can't find them in the telekom webpage...
-
Multy X permanently blinking white
A Multy X which has worked for several years will now only flash its LED white when starting up, no matter how long it is left. As it never flashes blue I can't add it back to the network. It cannot be reset (I understand reset does not work in this state). Is there any way to fix it?
-
Lan port speed max 100Mbit Multy X
I have one Multy X connected in bridge mode to my network, the wan connection shows as 1000Mbit in the app, wireless devices are getting constant 600-700Mbit download rates, but all other lan ports show connected at 100Mbit, even though they are all capable of gigabit connetion. What can I do? I have submited feedback from…
-
How does mesh work?
I have installed mesh as Multy X + Multy mini. When I move with my laptop from the one access point to another, I see freezes when I’m on the call. Should mesh behave like this?
-
Multy U 2 sites / bridges in one LAN?
Hi, I have a home network with cable connection to 2 floors. I would like to configure 2 multy u access points both as bridges, so they would work as access points sharing same SSID. I seem to be only able to add the second AP as satelite under the primary, which means connecting through primary via WLAN backhaul. I tried…
-
Disable 5ghz on multy U
Hi, Is it possible to do radio management on a multy wifi system? I have 3 x WSR30 Multy U access points and they are great, but i would like to disable the 5ghz radio on some of them. I think this is pretty basic feature and most competing mesh systems allows this level of management, so was quite surprised not to find it…
-
MyZxyel account setup required in order to ask a simple question?
I’m not a business customer. It’s crazy that Zyxel or any company asks for your address, phone, email silliness in order to join an online community to ask a question. Hopefully, it’ll be as easy to remove my user information after my issue is resolved.
-
Offline multy won't delete from app
How can I force a multy that is 'offline please check the power connection' to be deleted from the app - when I try to delete it just says 'Delete Multy "null"?' when I press delete and confirm it just resets the app and says connecting to my home and then continues to show the blank multy. Ive been trying to add a new…
-
Diffenent LAN IP on my third Multy X
Hi, I have had connected 3 Multy X together for 3 or 4 years now, without big issues. Now they are starting to annoy me.. The main Multy gets it regular IP, 192.168.212.1, the second one first got IP in 192.168.38.x range, the third one aswell. I then reset all the Multys, with same result. I then switched places between…
-
I have 3 Multy U (WSR30) connected using wi-fi backhaul and are having problems using the LAN port!
I'm unable to connect a device/PC to one of the Multy Extenders (i.e. not the root) using the LAN port, any idea on what the problem could be?
-
Multi App not communicating with Multi X units after IOS15 up grade.
I can't get my Multi X units to communicate to the Multi App. My iPhone 8 updated to IOS15 on Tuesday night and since then have not been able to connect to the Multi X units. All the app gives me is the Home Screen and "Connecting" at the top but nothing happens. I would like advice on what to do.
