-
Multi x android app network reset fails flash firmware?
Hi my 3 multi x have been working fine for years but I lost my mobile and have had to restart the setup process as I never backed it up to the cloud. Now since resetting my main multi which is now on latest firmware my second and third multis wont complete setup process. I have tried resetting both several times and wait…
-
1. node keeps restart
Hi I have just installed a network with 2 STK. Multy U. The first node keeps loosing internet connection after about 2 hours, and then the light gets red. After about 5 min. It starts to Work again. Do anybody knows what is wrong.
-
app is unfriendly
The app does not have space on my phone. It stops after naming nettwork. Then next step is blocWhat a miss app.
-
multy-x - how do I delete a DHCP Reservation?
how do I delete a previously created DHCP reservation, on a multy X system?
-
Problem trying to run PiHole with Zyxel Multy X Wifi.
Home Setup as follows: Virgin Media Superhub in Modem Mode, plugged into the WAN port of the primary Zyxel Multy X in the lounge. 3 further Multy X devices around the house in the same network acting as WiFi points One of these is in the study, Rpi with PiHole installed on it plugged into an Ethernet port I configure…
-
Parental control
Hi. I just bought Multy x to gain parental control. Internet is Awesome . But having trouble with parental control. I Can set up schedules and block access from devices. But somehow it only works when loggin on. For instance , if i block my computers/ TV/iPad access it only prevents Me from loggin on. But if i am already…
-
Multy X issue - cannot connect with the app
I have not been able to connect Multy X using the iOS app for a while. I then reset today the Multy X to re-do the installation procedure, and I am able to complete it, and it will set up default wifi, but after completing the installation the app shows not connected status and I am unable to change any configuration. As…
-
Since the Multy X updated to the lastest firmware version. My connect randomly shows no internet acc
When I check the link speed is very low. I have to disconnect and reconnect from the mobile to the router. I'm only 2 meters from the Multy. This as never occurred until the firmware update #Multy_Oct_2020
-
Why Zyxel Multy Plus does not retain the LAN IP
Hi! I just installed Zyxel Multy Plus and tried to assign 192.168.10.1 as the LAN IP (via the web GUI) and applied the settings. Then I wait a bit until the device has done applying and check the situation again; it shows 10.0.0.1 again as the LAN IP. I tried to change the LAN IP for a few times and always the same thing,…
-
Problem first time configuration Multi X
i have a problem with the configuration, when the configuration is complete and i try to add a second node, I have a syncronization error.. and I have to reset the configuration.. if I ignoramus's the second node, the app appears as disconnected. #Multy_Oct_2020
-
Multy x app stays disconnected
Do you have idea why My app stays disconnected? Internet connection works via multy x and phone is connected to it. Tested with Android and iOS. #MultyX_Sep
-
Multy Devices Reset when Certification Authority Expired
If your Multy have
not been upgraded to the latest firmware, we are unable to connect you to the Multy app for
configuring your Multy settings and device management due to the certificate
expiration. Please
follow the instructions below to reset your Multy and re-install your network
system. 1. Please download the latest…
-
MULTY PLUS (WSQ60) Backhaul WiFi Visibilty
Hello, I've noticed that after last update I've made this Monday backhaul
Wi-Fi network started to be visible. You can see it in the picture. It’s definitely
not my admin WiFi network and none of the employee our gest either. I haven't noticed that before the update it
was visible and I would prefer that it would stay…
-
Ethernet Backhaul
Hi, I've problems with the ethernet backhaul function. I've connected my 3 multys via wifi - this works. Then I've created a port based vlan on my switch for the ethernet backhaul of the 3 multys. I've turned off the switch - connected LAN from the main multy and the 2 WAN ports from the other multys to the switch - and…
-
Zyxel multi u setup dont give input for network name and password
so i use the multi app on my huawei p30 it connects to the device ok and says you can now proceed to created your wifi network..Then it will without any input create a network and i guess set a password..and then when finished say all is good.. unfortunately only the mobile with the app can connect to it..All other devices…
-
Multi X nodes
How many devices can you have in the mesh? Not clients but the Multy X devices themselves. Also is there an external device? #MultyX_Jul_2019
-
multy x node goes offline at the same time each day
each day around 3.45pm UK time, one of my zyxel child nodes goes offline. It's happened 3 days running now, any ideas? I have to reboot the device to get connectivity.
-
[Multy U] Ping spikes from 5ms to 100ms every 10-20 seconds
Hello!My setup of 2 Multi U will have ping spikes every 10-20seconds from 5ms (to some other device in the same local network) to 100ms. It happens both in NAT and Bridge Mode. Any know a solution? Best,Tim
-
Internet shield
Hello. Is there a way to restrict internet access via Multy X? I want to set sensible restrictions on what websites my children can access. I’m aware I can limit their times of access but that doesn’t help me control where they go when they’re online. Thanks.
-
Faster internet speeds at secondary nodes compared to primary
Hi, I have a question, or maybe an observation, that seems really strange to me but perhaps there is an explanation... My broadband is 300Mbps symmetrical FTTH. I have 3 Multy X nodes in my home. The primary node is connected by Ethernet cable directly to the internet via a fibre modem in bridge mode. A desktop computer…
