-
NAS 326 fan speed
Hi Could someone direct me to the thread for fan speed on these things please i couldn't find one and cant believe no one else has asked this as the fan speed turns at max revolution and is way too loud and unnecessary, i have swapped out the fan and its still the same, How do i make the fan speed less by command line…
-
Bricked NAS540 boot loop because it could not load the kernel
Hello guys I have purchased for cheap a dead 540 I like to revive it and found this existing topic https://businessforum.zyxel.com/discussion/7674/nas542-bootloop-after-debian-omv-get-a-new-firmware-solved After some try & error I could get it booting the uImage.521 but the rootfs mount gets an error After that I tried to…
-
Problem with NSA310
Hello, I know that NSA310 model is not supported anymore, but maybe some of you knows what happened here. My NSA seems to be working fine, except HDD recognition which stopped working. Everything looks fine on the software side, i mean the system starts and boots up properly, you can logon, upgrade/downgrade firmware, i…
-
NAS540 loses the mapped network drives in every boot!
Does anyone have the same problem or even solved the case? I have multiple folders mapped via NAS starter utility Z: V: O: etc. and i need to re map them always when i start my machine even i have the "reconnect at windows login" tapped box!
-
NAS326 WebDAV
Hello NAS 326 users! I can't set a static IP address to configure WebDAV. It gives an error and every time you have to restart the storage. Help please :)
-
NSA 325 - Write to disk an volume scan failed on disk1 (no problems with disk2)
Hello, I use two 4GB HDDs in my NSA 325. Writing to disk1 failed after some minutes and running a disk scan failed on this drive. No problems at all with disk2. What can I do to repair the drive and save the data? Kindest regards
-
Does Rsync use Hardlinks?
In short,about 5 years ago is sold my Zyxel 520 because i wanted to make backups from the Nas, which are invisible for windows, because of emotet and co.This was not possible.So i switched to HP Gen8 Server and Openmediavault which works great.Now i wanna have bigger disks and dont wanna spend so much € so i will sell my…
-
Upgrade Discs in NSA325-v2
Dear community, I am struggling with a problem when upgrading my discs. My initial situation: I have the NSA325-v2 with a RAID1 array on two disks with 2TB each. I will call this two disks O1 and O2 (Old 1 and Old 2). Everything is working perfectly but S.M.A.R.T has detected sector defects on O2 so I decided to upgrade.…
-
NSA 325v1 RAID1 degraded
My RAID with 2x 2Tb WD Red disks in RAID1 is showing as degraded. I can read all files from DISK 2 when DISK 1 is unplugged. DISK 1 external test is failing, so I purchased a new 2Tb WD and inserted it in DISK 1, however the recover process stops. How can I recover this RAID? Am I missing something?
-
NAS 542 - only root can login through sftp
I have set up my NAS 542 as a ftp server and port forwarded through my router. When I use Filezilla to login using SFTP to the ftp server from a remote location it works. When I try and login as any other user it rejects my password with "Authentication failed". I need to set up client sftp logins so that they can download…
-
How to set mtu at boot up to get jumbo frames on a NAS 542
Hi !I have been looking around for some info where i can edit a file so that i can make the mtu setting get set before network card starts up.In others nas i have hade there where an option in the dhcp settings page.So i was hopeing to get some answers from here on how to enable jumbo frames directly at boot.Because the…
-
NSA320 public folder has gone missing
Used to work just fine. At some point in the last few weeks, the public folders disappeared. I expect it was a Win10 update that broke it. Now itunes is lost. How can I get the public folder back to visible. I see it when I log in to the NSA device via web browser but it is invisible to the computer and hence to itunes.…
-
NAS 540: Volume im Raid vs Volume im Festeplattenverbund
How much faster is a "Volume im Raid"? Use the NAS 540 hardware raid or something like LVM? It´s nice to know, if not the hard Drives fail but the NAS crashes. A software raid solution can also be read and use under OMV oder other Linux distributions with LVM Support. I not sure what happens if the raid Controller oder…
-
NAS 326 findme does not work
Hi, New NAS326. Power light, system light and hard drive lights all solid white. LAN light blinking green. The router has seen the NAS326 and assigned an IP Address to it. I can access the NAS326 by using the IP Address. But when I try to use "Find Me" I push the button and nothing happens. I have tried holding the button…
-
USB not for filesharing?
I have just bought an ARMOR Z2. There is a USB3 and a USB2 port. If I put an external harddrive in any port, it does not show anywhere on the GUI?
-
How to open NSA325 v2
Hello. NSA325 v2 : the On/Off switch is loose. The fixation must probably be glued again. My (easy?) question : how to open / disassemble the outer plastic case. There are 2 screws underneath, 4 at the back (seems for the ventilator), but the case still cannot be disassembled.
-
Nas540 - It is going to reboot by itself again and again.
Hi all,since today I have problems with my nas540. During booting, all LEDs are blinking and white. I didn't start a firmware upgrade. I don't know what can I do. step 1: after pressing the power button -> all LEDs are blinking and white -> it starts. step 2: after a few minutes (power & system LED on) -> HDD1 - HDD4 are…
-
NAS326 ownCloud file location
So I just installed owncloud via the app center on my nas and it's working like it should. However all of my files that I already have on my nas won't show up on the owncloud interface and vice versa. I can't see any files that are saved on the owncloud on the local file browser even though owncloud is installed on the…
-
Zyxel NAS 320 does not start anymore - all LEDs on
NSA320 Since yesterday I have the following problem with the NAS.
When switching on, all LEDs light up, the fan goes on and the LEDs stay on. NAS does not start anymore. Resett has no effect. What can I do? 1. LED Yellow2. LED Red3. LED Red4. LED Green5. LED Red Does anyone have a similar problem? Does anyone have any…
-
NAS542 fault
My nas542 has turned off by itself and does not turn on anymore, the power supply works regularly so the fault depends on the internal electronics. I was wondering if I buy a new nas542 and move the 4 discs to the new nas respecting the order will they work without problems? They are on raid 1. Thanks for the help.
