-
ZyXEL USG AP Firmware List empty
Since upgrading the USG Flex 100 from V5.21 to V5.30, the AP firmware list is empty (configuration > wireless > AP Management > Firmware).In the AP List (configuration > wireless > AP Management > Mgmt. AP List) I see my AP (WAX510D with 6.30(ABTF.3)) and the firmware status says update availiable. But an upgrade is not…
-
Minimum Equipment Necessary For ZyMesh
If I want to set up a simple mesh wifi network using NWA55AXE outdoor access points, what all do I need? Can I set it up with just the access points, or do I need another component. Another component other than a router. Does the router need to be a Zyxel brand and particular variety? Thanks, Tom
-
Is it possible to operate a Zyxel NWA55AXE AP as a Wifi repeater without a second Zyxel device ?
I would like to operate the Zyxel NWA55AXE AP only as a repeater, purely via Wifi (without LAN) with a Telekom router without a second Zyxel device is that possible? Or do I need a second Zyxel device connected to LAN as a bridge?
-
How to see the list of current WIFI clients for NWA50AX in standalone mode?
Hello, allI'm trying to find the list for showing all WIFI clients (MAC and etc.) on my NWA50AX. It didn't mentioned it anywhere on how to do it in standalone mode. Nebula cloud seems to support such function if I understand it correctly? But internet connection is not always available to this network. It seems like a very…
-
NWA50AX iPhone saying the password was wrong
This discussion was created from comments split from: NWA50AX + Nebula WIFI password is rejected, iPad,Iphone.
-
NXC 5500 specification confirmation
Hello, we will use 200 access points in our construction. We cannot use nebula due to regulations. It will be a build onpremises using the Controller. I am looking for answers to the following questions with this information. Answer 1: Access points must work in tunneled mode with the controller. How many access points can…
-
[Notification] NWA50AX, NWA90AX, NWA55AXE Smart Mesh Station can't get IP Issue
Issue Description: When a user activates Smart Mesh, stations that connect to the AP may not get the IP address. Scenario 1. When activating Smart Mesh in Nebula, Repeater AP has connected to Root AP, then clients can't get IP addresses under both Root AP and Repeater AP. Scenario 2. When activating Smart Mesh in Nebula,…
-
NWA210AX - Transmit Power 5GHz low
I have a perplexing problem. Not sure if there is a support process, but wanted to poll the community for answers. The NWA210AX is set at 30dBm max power for 5GHz channel. I understand it can't transmit that much power, but the datasheet says for US, 25dBm is the rated output power for 5GHz. Why is it dropping to 16dBm??…
-
Feature request: add hostnames to the Station Info page
I'm using my Zyxel in standalone and find the Station Info page very helpful. However I admit it would be even more helpful if I could see the hostname of the device reported not only IP/mac address. Can this be considered please? Thanks
-
NWA90AX - VLAN for guest SSID (only) doesn't work
As per title, I have an existing router that supports VLAN I would like ultimately to disable its WiFi (as it goes up to AC only) and use the Zyxel only. Now the issue being: the router does .q tagging and have the main WLAN on VLAN1 and the guest WLAN on VLAN 3. Extending the main SSID works ok e.g my mobile detects the…
-
Mesh / Roaming possible between multiple NWA90AX APs without using Nebula?
Hi, is it somehow possible to use Mesh / Roaming between multiple NWA APs (to make video/audio calls without interrupts when moving between APs) when using the standalone mode? Thanks for your feedback!
-
NWA50AX force login @ 5Ghz only
[active in AP mode]Can someone tell me how I can force my NWA50AX to connect wireless requests @ 5Ghz band only? Now my family members login on wifi6 @ 2,4Ghz. Thanks for your reply./jos
-
How to disable MESH? WX3401-B0
Hi, how do you disable Mesh on this router? Im not allowed to adjust the 2.4 and 5 ghz bands as long as its avtivated. On other routers it can easily be disabled under the wireless tab, there is no such mesh option on my router. Best regards
-
VMG4927-B50A Reset on high bandwidth
This DSL modem configured in dual dsl mode (fed by 2 different DSL connections) to provide me 30Mb down x 4Mb up. However, it randomly will reset - according to the isp this is due to the download speed exceeding the 30Mb bandwidth. I have thoroughly checked all computers behind the modem and all are clean (virus, malware,…
-
WAX630 on Zywall 110
Hi, I am trying to add WAX630 access points to a Zywall 110 as controller, they are visible and can be added but after they are added they never comeback online. Can they not be managed by this fw?
-
[NWA50AX] iOS clients password rejected
Been having issues with NWA50AX wireless AP. iOS clients are deauthenticating on a daily basis. When they try to reconnect, they are reprompted for the password, and then get an "incorrect password" error. Resetting iOS network settings allow reconnection until the problem comes again later. Relevant log information from…
-
NWA50AX Extender mode
Hi allit is possible to use NWA50AX to extend third party wireless lan? I have a non zyxel router with integrated wifi that would like to extend NWA50AX will act as pure repeater only (no LAN connection) Regards
-
NWA210AX and Cisco POE Switch
I have 2 NWA210AX connected to Cisco C3650-12X48UQ POE switch. In Nebula portal the power mode shows as limited for both. The switch supports 802.3at. Here is the POE status of one of the ports: Interface Admin Oper Power Device Class Max (Watts) --------- ------ ---------- ------- ------------------- ----- ---- Te1/0/37…
-
Zyxel NWA210AX Station List limited info over SNMP
Why is it that only a limited subsection of information is available over SNMP for this? No link rates, failed, retries or data transfer? This makes it unusable for troubleshooting, which isn't that kinda the point? Is there any way to run custom scripts to pull this information from the CLI and send it to a logging server?
-
Zyxel NWA210AX STILL speed limited?
I had read there is an issue with this AP limiting maximum throughput and had hoped it would be fixed, but it still seems to be there. I can use my phone at 1200Mbit link rate and achieve 800Mbit on a good day which is great, but my laptop at 2400Mbit link rate at best has done 940Mbit. AP is connected over 2.5Gbit to a…
