-
All devices can ping only itself and the router (lan)
The Router is zyxel EMG1702-T10A. When i try to ping any devices in my lan network, i get this output : ping 192.168.1.104 PING 192.168.1.104 (192.168.1.104) 56(84) bytes of data.
From 192.168.1.108 icmp_seq=1 Destination Host Unreachable
From 192.168.1.108 icmp_seq=2 Destination Host Unreachable
From 192.168.1.108…
-
Will the NWA55AXE Outdoor Access Point Mesh with the Multy AX1800 whole home WiFi system
I have a NWA55AXE, I am looking to Add the Multy AX1800 whole home Wifi system. will they interface together or am I better off with a different setup.
-
Zyxel nwa3560-n no access?
Hi, I hope the community can help with this one! I recently set up an outside office and have struggled to get decent wireless signals in the office. We have fast (1Gb) broadband and I have extended this to the office but wanted faster WIFI so bought a nwa3560-n and tried to set that up. When it is connected to the network…
-
NWA50AX remote shutdown and power on
Hi all, I recently installed a NWA50AX Access point and would like to turn it off at night and wake up in the morning. Is there a way to remotely shutdown it and use wake on lan to start it? I tried the simple way using ssh but it looks like it's not working. Thanks
-
How do I connect my NWA210AX to the internet?
I've tried the option B standalone management, but those directions do not work. Is a PoE switch required just for connection? 1.1.1.1 gets me to cloud flare page but there is no configuration page available. Can anyone help, I can't be the first person with this issue. Thanks for help.
-
AP AC500
I have a new AP, Zyxel AC500 just coming out of the box. As usual we connect this AP on our network so it can automaticly discover our USG40w router and automaticly join the AP fleet. But this time not working. On another brand new AC500 with the same issue we noticed a broacasted wifi called Zyxel_xxxx. On that second AP…
-
Assistance needed with WAC6552D-S
Having an issue with a new WAC6552D-S. Just purchased it 2 weeks ago. Add it to the Nebula Cloud to use while waiting for the NXC2500. Once I received my new NXC2500 I removed the WAC6552D-S from the Nebula cloud then attempted to add it to NXC2500. This is where the issue started I am unable to access the web GUI. I tried…
-
Four NWA5123 bricked after firmware upgrade
Hello dear Zyxel Community, Yesterday, in an attempt to switch to a ZyMesh Network configuration we tried to "upgrade" four NWA5123-AC HD, they were on version 6.25 as they shipped with it while our Wireless Controller (NXC2500) is on version 6.10 and seems it can't go any further, we did this because most of the others…
-
Uplink speed issue NWA210AX and GS1920-24HP
Hello, I have 2 NWA210AX connected to my Switch GS1920-24HP in POE.They have been working fine for a while but recently one of the 2 NWA is showing an alert on the controls center.The uplink speed is only 100Mps; the other one works perfectly fine.The only think that recently changed is a recent firmware update (don't know…
-
user/group acces with 2 SSID with Radius / Ldap
Hello My network : AP Wifi (NWA1123-ACv2) => freeRadius => openldap I have configure 2 Wifi SSID "wifi1" & "wifi2" I have creat 2 groups in the ldap and I would like only user of "wifiX" groups can access to "wifiX" SSID. I was expecting to use the "NAS identifier" parameter send from AP to Radius to filter It works only…
-
Why two default SSID profiles per radio for NWA210AX
Trying to understand why this is so. The default config of a new NWA210AX access point has two MBSSID profiles for each radio. Each profile is the same SSID and same parameters. A Wifi scan shows the 2.4Ghz SSID appearing on two different MAC addresses and the same SSID appearing on the 5Ghz radio also with two different…
-
* NWA50AX LED Bright blue - but Clients connected *
In the manual for bright blue LED: Wireless interface
connected but no clients. This is not true in my case, so what does the blue
steady LED means?
-
Question about setup GS1200-8HP v2 with NWA50AX behind a FRITZ!Box 7590
Native language: German / Question in German below. Hello all,please excuse my english. I have been a satisfied user of the GS1200 desktop switches for many months. Now I am at a point where I need help before I buy more components. Situation / Introduction: There is a FRITZ!Box 7590, which realizes the access to the…
-
How do I add 2.4 G
I need to login to my account to change my speed.
-
MAC Filter on NWA50AX as Root/Repeater
Greetings,I set up a wifi network with 2 NWA50AX configured as root and repeater. Now I would like to use a MAC filter list. I created a list of MAC adresses that should be allowed to access the SSID. When I use and activate this filter list on both APs no device is allowed to access the SSID.What is the recommende…
-
[Video Demo] How to Configure Zyxel Access Point with Local Web Interface
Zyxel access points can be managed either in standalone mode or in Nebula cloud-managed mode. Users can configure the device using its local web interface. This video will show you how to get your access point setup via the device’s local web interface: https://www.youtube.com/watch?v=g8IBHNHVUMY&t=36s
-
VLAN not working in my home network
This discussion was created from comments split from: Networking issue with Zyxel WLAN Controller and VLANs.
-
Which AP for my UAG2100 Controler ?
Good day, I need to expand my wifi network, I have a UAG2100 with 3 AP NWA5123-AC model.My question is which actual model of AP is suitable to my UAG2100 ?Can I put an PoE switch in order to supply the new AP ?Thanks a lot
-
3x NWA50AX V6.25(ABTF.5), standalone APs: Where is 802.11r ? And: (faster) dynamic routing
Hello, I'm using 3 NWA50AX V6.25(ABTF.5) as standalone APs with same SSID throughout my house. Due to obvious reasons WDS isn't appropriate with these two band APs and I don't want to let the APs to be controlled externally (e.g., NCC) Where is option 802.11r for fast roaming in standalone mode? This seemed to be supported…
-
NWA210AX firmware update advice
I have a NWA210AX with back level firmware. The download page has three versions available (all newer than mine). Can I install just the latest version or should I install the three versions sequentially?