-
NWA50AX force login @ 5Ghz only
[active in AP mode]Can someone tell me how I can force my NWA50AX to connect wireless requests @ 5Ghz band only? Now my family members login on wifi6 @ 2,4Ghz. Thanks for your reply./jos
-
How to disable MESH? WX3401-B0
Hi, how do you disable Mesh on this router? Im not allowed to adjust the 2.4 and 5 ghz bands as long as its avtivated. On other routers it can easily be disabled under the wireless tab, there is no such mesh option on my router. Best regards
-
VMG4927-B50A Reset on high bandwidth
This DSL modem configured in dual dsl mode (fed by 2 different DSL connections) to provide me 30Mb down x 4Mb up. However, it randomly will reset - according to the isp this is due to the download speed exceeding the 30Mb bandwidth. I have thoroughly checked all computers behind the modem and all are clean (virus, malware,…
-
WAX630 on Zywall 110
Hi, I am trying to add WAX630 access points to a Zywall 110 as controller, they are visible and can be added but after they are added they never comeback online. Can they not be managed by this fw?
-
[NWA50AX] iOS clients password rejected
Been having issues with NWA50AX wireless AP. iOS clients are deauthenticating on a daily basis. When they try to reconnect, they are reprompted for the password, and then get an "incorrect password" error. Resetting iOS network settings allow reconnection until the problem comes again later. Relevant log information from…
-
NWA50AX Extender mode
Hi allit is possible to use NWA50AX to extend third party wireless lan? I have a non zyxel router with integrated wifi that would like to extend NWA50AX will act as pure repeater only (no LAN connection) Regards
-
NWA210AX and Cisco POE Switch
I have 2 NWA210AX connected to Cisco C3650-12X48UQ POE switch. In Nebula portal the power mode shows as limited for both. The switch supports 802.3at. Here is the POE status of one of the ports: Interface Admin Oper Power Device Class Max (Watts) --------- ------ ---------- ------- ------------------- ----- ---- Te1/0/37…
-
Zyxel NWA210AX Station List limited info over SNMP
Why is it that only a limited subsection of information is available over SNMP for this? No link rates, failed, retries or data transfer? This makes it unusable for troubleshooting, which isn't that kinda the point? Is there any way to run custom scripts to pull this information from the CLI and send it to a logging server?
-
Zyxel NWA210AX STILL speed limited?
I had read there is an issue with this AP limiting maximum throughput and had hoped it would be fixed, but it still seems to be there. I can use my phone at 1200Mbit link rate and achieve 800Mbit on a good day which is great, but my laptop at 2400Mbit link rate at best has done 940Mbit. AP is connected over 2.5Gbit to a…
-
Wireless K.O.
Salve, da tre giorni il dispositivo WAC6103D-I ha diversi problemi di funzionamento. 1) Si accende, rilascia i due SSID configurati della Wifi ma non permette la connessione, dopo il riavvio riparte a funzionare correttamente. 2) Si accende e non distribuisce nessuna wifi. In entrambi i casi il portale Nebula non lo…
-
NWA5123-AC-HD wall mount
hi there, I'm a bit desperate: I'm looking for a wall mount for a NWA5123-AC-HD. Anyone has one to give / sell?Anyone could gave me a plan to rebuild a new one? I've lost mine but I need it.Thanks in advance for your helpRegards Mat
-
I have Zyxel N4100 Hotspot, its giving message after connecting and before login Page.
Message: The network that you're trying to join has security issues. For Example, the login page might not belong to the organization shown. CONTINUE ANYWAY VIA BROWSER
-
2 APs NWA50AX connected to 1 router
If I connect each AP to 1 router by UTP in the same vlan, are they aware of eachother? Can I have 1 SSID and roaming for clients?
-
NWA50AX / NWA210AX - questions
Dear Zyxel support,I am a "curious" owner of both the APs in the topic title and I have some questions/things that are not clear. Not sure how to start this, but here I go: I did some test on both of these access points and I am finding some differences between the power levels at different settings.All tests were done at…
-
[RESOLVED] NXC2500 v4.30 - Firmware update
Hi, I want to update my ZyXel NXC 2500 - wireless lan controller. ZyXel NXC 2500 Firmware: -Start module: V1.03 -Current version: V4.30(AAIG.0) -Release date: 2016-07-05 The ZyXel is registered in the "myzyxel.com" platform but it does not appear in the "Firmware download" tab (this hardware may not be supported by this…
-
Site2Site WiFi in Nebula with Shared SSID and VLAN
Hi, we've to buildings (family 1, family 2) in 2 sites in one organisation in nebula. We want a shared SSID for WiFi and a Site2Site WiFi connection if possible. The buildings are about 200m away from each other. https://www.youtube.com/watch?v=TMo1_24LfCk Is this also possible for Site2Site Connections? What is the best…
-
Configuring Load Balancing Question
How do you configure load balancng properly if the number of clients in the environment are dynamic? E.g. people in exhibition hall, office that is hot desking.
-
NWA210AX How to debug slow 5GHz connection?
Hi, in my setup I have an NWA210AX powered via POE12-30W connected to a 2.5 GBit Port of an XGS1210-12. At another 2.5 GBit port of that switch I have a server which runs an IPerf3 server. From another computer it can max out the 2.5 Gbits, so that is working fine. With a MacBook Pro (14-inch, 2021) (and every other device…
-
Prioritization SSID
Hi guys Weve got an NXC5500 Wlan Controller. We have multiple SSIDs, all (except one) with WPA2 authentication. The SSID with security mode "open" is for the exams. It should garantee a good and stable internet connection during the exam. It is working well, but this SSID is allways connecting first to the devices,…
-
[SOLVED] NWA110AX no network connection
I wanted to replace my NWA1123AC-PROs to NWA110AXs. They refuse to connect to NC. Just orange/green blinking led. They're connected to a GS1920-24HP, also on Nebula Cloud. [Edit] There has been an issue with the firmware update process. After downgrading/reset/connect/update combo it's working.