-
Multy M1 client not listed
dear community, I’m using a Multy M1 as wireless access point and one cabled client. the cabled client is not visible in the client’s list (parental control). How is that possible? And how to make it visible? thanks
-
Multy M1 WSM20
I purchased the Multy M1 and has been working fine with my old isp and was getting full speed from the router. Now I have new isp providing 900mbps+ to my home. I can confirm the property is getting 900mbps by using the supplied router from the isp and running online speed test. I have tried the following and ended with…
-
InternetConnectFail in bridge mode (Multy M1)
Since my last topic regarding the network topology in bridge mode, I have connected only the main Multy M1 node to ethernet and the other 2 nodes are connected wireless to the main node. Also I have disconnected my IPTV receiver from the Multy (behind a IGMP snooping supporting switch) as it was generating too much…
-
Multy M1 is useless
This comes from sheer frustration! I have a Zyxel Multy M1 connected via PPPOE to a static IP. I have a second M1 in a bedroom on the first floor at the back of the house. It reports as too close with a RSSI -62 dBm. I have a third M1 in the outbuilding approx 20m from the back of the house that daisy chains from the…
-
Unresponsive DNS server. Multy on Bridge mode ?
I have a 4G Huawei router on which I connected with ethernet wires three multy devices in series in one direction and another multy that I connected to the first multy to serve me in a different direction from the others. I use the same SSID. The problem is that I have multiple internet disconnections of my laptop or my…
-
Multy M1 - Wi-Fi printer (HP) vs. mesh
Hello Everyone, I've got Multy M1 with mesh (router + satellite). I've got also a HP wi-fi printer. As it is mesh, I've got one wi-fi network available. When I'm in a room, where main router + printer are installed, I can print with no problems. When I go to another room and my phone/laptop connects with the satellite, I…
-
WSM20 ProtonVPN Client compatibility
Hello everyone! I am trying to setup a router-wide ProtonVPN service (as a client) on my Multi M1 (WSM20) Mesh WiFi Router, but once I insert the credentials and upload the .ovpn file nothing happens and the router does not connect to the service. Might there be some compatibility issues or I am doing something wrong?…
-
Multy M1 some devices are not visible in parental control
Hi, some devices, like Playstation 5, are not visible in Parental Control. I have 6 Multy M1 in standard mode. My devices are connected by Wi-Fi or LAN. Any Windows PC, Android phones, google assistand, smart apliances and others are visible in Parental Control, not Playstation 5. One is conected wirelessly, on by wire,…
-
Unable to Activate Multy
I receive the following screen repeatedly. I am using iPhone to access the device. Ios 16.1.2. Multy model is Multy X AC3000. Serial number S183F04001368. I was able to setup two other multy X using the app. But this one is failing after resetting, restarting iPhone etc. I am setting this up as a stand alone primary node.…
-
Problems with the Aulty App
Hello all, is there a Problem with the Multy App for Android Smartphones. I recieve am Message: "No Service available, try again later
-
Multy X Android App not connecting
Since approx Jan 29 2024 getting error message when using android app. Occasionally told Google.com not available as part of message.
-
Multy M1 WSM20 not working after reset
Ok, so when trying to use the Multy app all I get when i open it is the app is unreachable, please try later. I have cleared everything from Bluetooth to WiFi cache. I've reset the the multys to factory settings. I've unistalled the app and reinstalled it after clearing its cache and data. I've done everything and it still…
-
Multy U unstable bridge mode
Hi, I have a router + 4 Multy U in a daisy chain configuration. So the primary Multy is connected to the router and the others in a chain to the primary Multy. The router is also wired to some other devices. I would like to have everything on the same subnet and therefore I selected Bridge Mode in the Multy app. This mode…
-
Setup Multy M1 without internet access
Hi! I've moved to a new house that does not yet have internet connection and purchased Multy M1, but it says it requires internet. This must be a joke. Is it really so that I cannot configure wireless in my house until I get internet? (Why would I want wireless before that? To use my internal network in the house, reach my…
-
Multy system slowdown & "attacks"?
I'm now getting frequent system slowdowns with a 3 node Multy system connected in bridge mode to my router (Zyxel VMG3925-B10B). When this happens the router shows in excess of 2600 connections on the Multy that has a wire connection to it. Restarting the Multy doesn't clear it, restarting the router does. At that point…
-
WSM20 router red and no web interface, but still routing
I have a strange issue with my WSM20. I have 4 x wsm20 multy routers configured as a mesh, using the bridge option, with an upstream Mikrotik managing the internet connection and dhcp. All was ok while the wsm20 IPs were assigned by DHCP (through mac reservations) from the upstream mikrotik. But because I saw multiple…
-
Green light goes off
I have just setup my new Multy M1 set of 3. My problem is that the steady green light goes off after 2-3 minutes in the main router. I tried to find anything within the settings with no luck. The device is working OK, however the light is off like in a power saving mode or something. Is there a way to have it on…
-
Error no internet
hello Jerry, Since thursday we have 2gb internet with a new mod and since then we have a problem that the sateillites have no internet. When i pull out the power cable its starts up and everything is okey for some time but after a time both sateillites have no internet. See picture. This happend all the time. It is still…
-
Is there any way to bypass Initial GUI
Is there any way to bypass Initial GUI and be able to go to expertmode without wan connection?
-
Same issue as so many other people, but I don't have the tech knowledge to access all answers!
Hi, I don't speak network, so I am at a serious disadvantage on these forums and trying to get help. I have a Externally mounted NR7101 Modem connected to Vodafone in the UK on the 5G network. Signal strength is -80DB (I believe that is good). I now have 3 x Multy M1s for the home mesh wifi setup. The first is wired by…
