-
NWA210AX and client deauth by Configuration Changed
Hi, I'm experiencing this issue where one of my WiFi clients will periodically get deauthed and then re-associate and keep doing this every few minutes. The message in the log is: Station: 18:26:49:9f:82:b5 has deauth by Configuration Changed on Channel: 161, SSID: Yggdrasil 5Ghz, 5GHz, Signal: -70dBm, Download/Upload: 0/0…
-
Has anyone tried ATP on Nebula yet?
I was excited to try my spare ATP200 on Nebula, but I can't seem to get the ZTP file. When I add the firewall and setup the WAN IP's I get a little dropdown error about the VPN (but none is configured) and I can't create the ZTP file. I just get an endless loading circle on the ZTP mode section. Has anyone tried it yet?
-
No clients showing on AP's despite multiple users connecting w/o issue
We have multiple clients using various Zyxel Access Points and they are showing no clients attached in the NCC. The users are working fine and devices are connecting w/o issue but it makes my life difficult since I can't tell if any one AP is overloaded. If it was just one org/site then I could say it might be an issue at…
-
NWA110AX goes offline several times a day
Hi, I have three NWA110AX WLAN Access points in our office - one is connected via ethernet to a DSL router - the others via wireless mesh. In the course of a day it happens several times that one of the access point looses connection. I do not see anything in the logs, what helps me. Beside this message: "System Nebula…
-
Connected Devices with *
When I go into my connected devices, I see many listed with just an * next to it. What are these?
-
NWA50AX LED alternating between green and blue
Hello, I've got a new NWA50AX installed in my house and the LED is alternating between green and blue in a secondly frequence and I can't find anything about it. The LED status sheet linked in the FAQs does not cover the NWA50AX and the particular state. The device seems to be working properly though... Any help is…
-
WAC6103D-I AP's have decidated firmware and aren't up to date...
On my site, I have 5 WAC6103D-I AP's and I noticed that they aren't up to date when you compare it to the latest firmware version you can find in the download centre. I don't find a way to update them via Nebula since they are "Dedicated"... How can I solve this?
-
need to use WPA password AND macaddress filter on NWA1123ACv3 . is possible?
Hi, a customer policy ask to use for wifi WPA2 password and macaddress filter , in simple way only registered and know device can connect to wifi with also wpa2 password. Is this possible ? i see around Nebula console but did not found macaddress filtering options. thanks
-
hello everyone!!!,
How to check who has access to the system on NSG100, Thank you!
-
Switch Nebula - PoE On Off by port
dears, Referring to a Switch pPOE Nebula compliant, is it possible to switch on and off POE via nebula just for one port or specific group of Ports? And is it included in basic license? I am looking for a gigabit switch 8 ports poe+ - It is for my house so nothing so complicated - just I need this functionality - Can you…
-
How to onboard a Nebula LTE3301-PLUS to NCC and configure WAN Ethernet plus WAN Failover
LTE and 5G
fixed wireless access (FWA) are booming and growing rapidly in the broadband
market. Most mobile routers in the market typically are an on-premises
solution, which cannot be managed nor monitored via SNMP. Therefore, IT-based
system integrators lack a good management platform to manage and monitor mobile
router…
-
Application Patrol Issue Nebula Devices Do Not Upgrade No News !!
Hello support, Yesterday an automatic upgrade to the latest firmware should have been done at 2pm+1 but for a customer complete org it didn't happen. Worse : I can see that an upgrade is available but when I click on "upgrade now" it doesn't do anything. All sites are impacted ! Even a schudeled upgrade does not work,…
-
are there any public HTTP RESTful APIs for the Nebula portal ?
Hello, are there any public HTTP RESTful APIs for the Nebula portal ? Ideally I would be able to integrate APoints information into my own portal... if these API exist but are not yet public I'd happy to test them.... thx
-
I was buy second hand Zyxel NWA1123-AC PRO and its register already
Hi looking for help, I was buy second hand Zyxel NWA1123-AC PRO and its register already and I cant setup is anyone who can help me with? I have this AC with box and all paperwork even with first owner address on the box. Please tell me that its possible fix that. Thanks
-
Setting up DDNS on ATP100 in Nebula
I need a Nebula Plus or Pro Pack License to add dynamic dns (DDNS) on my ATP100? I cannot find this menu over Nebula, though I had it set up previously when connecting directly through my LAN. Also - Is it normal that I am locked out of the ATP100 locally while it is connected to Nebula? Is there a way to access locally or…
-
Recovery Steps for Nebula USG FLEX/ATP Series Application Patrol Signature Issue
Symptom: The App Patrol signature release V1.0.0.20220310.0 may create parsing error on device for both on-premises and on-cloud modes, application patrol daemon will not work well after updating this new signature though the rest of UTM features keep running. However, the worst case is that device may get stuck if device…
-
USG ATP / FLEX high CPU usage -> reboot: doesn't come up, SYS blinking forever
I'm managing some USG FLEX (100, 200, 500) in Nebula, for different customers.Starting from yesterday March 10 at 21:30 UTC, all firewalls are using much CPU.Today I have restarted 2 USG FLEX (a 100W and a 500) and are no more working now, they don't come up, don't boot.Is someone experiencing this situation?
-
[Nebula Demo] How to Configure Nebula NR5101 Mobile Router with NCC?
With the latest update of Nebula, the Zyxel Nebula cloud management solution has now included the Nebula Mobile Router series lineup, adding its WAN failover feature support along with Nebula access points, switches, and gateways in one single platform. The integration not only provides non-stop Internet communication…
-
Possible to add a description or rename VLANs?
Is it possible to add a description to VLAN's? It would be really helpful to have a quick reference in Nebula for them.
-
VLAN Wireless & Nebula
firstly the customers network which is looked after by a third party. They have 2 vlans VLAN 1 is the office and default network IP Range 192.168.252.xxx VLAN 10 is the guest network. IP Range 172.10.10.xxx The IT company have programmed a port on there switch for me to connect to. When i connect my laptop to this port…
