-
zyxel nas326
Hi everyone It is possible to install a USB wifi adapter in the nas326 thank you #NAS_Dec_2018
-
How do I set up my Nas326 ?
Hi This is my first time with a NAS, I'm not a beginner at computers, just the NAS. I have two disks in my NAS one at 2TB and one at 4TB and I would like them to be accessible as different disks with drive letters or names, but I would like to use them as any disk on any server create my own folders and such. And how do I…
-
NSA310S - migrate to new HDD
Yes, this is pretty old piece of HW, but i didn't found in user guide, how to migrate to new HDD. What is the best approach, to change HDD (to bigger HDD) and preserve at last complete configuration and packages? Already have data backed up via lan. I don't have startup CD anymore..
-
NAS542 very slow and unstable file transfer
Hi my NAS542 has become very slow during file transfer (usually 5 mb/s) and sometimes the file transfer stop with a error. I tried to transfer files with terminal but it doesn't solve the problem My FW version is V5.21(ABAG.7) I tried to reset and initialize the nas, change to RAID5 to JBOD, change Hard Drives, nothing…
-
NAS 520 - App Center - download list fail
I have problem with my NAS520. There is no apps in App Center. I cannot update list - there is error "download list fail". I already tried: - factory reset - rm -rf ZYPKGS (by SSH). Any ideas?
-
FTP encryption in Filezilla
Hello I have Zycel NSA310. The problem is with FTP connections. When i try to connect via Windows Explorer everything is OK, but if i use Filezilla i don't connect to the server. I must change encryption from "Use Explicit over TLS if available" to "Only use plain FTP (insecure)". What i need to do not be necessary to…
-
I access files on Disk1 with no volume name. Please let me know how to acess my files?
-
NAS 326
The NAS 326 has default drives. How do I add custom drives to the NAS 326 drives. Also how do I access the NAS 326 remotely. Thanks
-
Fix slow speed with NAS326
Through troubleshooting and the process of elimination, I've determined that my NAS326 is the bottleneck for slow file copies from my laptop. I am only getting 2-3MBps. It is slightly faster with smaller files. I've tried different drives, wired network, rebooting, etc. The only possible solution I've found online has to…
-
325 v2 - 2x1TB HDD RAID1, 1 HDD not working
There are 2 topic: - I do not know, why not works one of my HDD in the NAS (see below). - I want to upgrade my system: 2x3TB HDD. (How can i do it?) Let's start with the first: My RAID status is degraded. It looks one of my HDD does not work, when i want to repair, it says: "Disk capacity must be equal to or greater than…
-
Download all files off NAS326
Ok I have had my NAS for a long, my Wife wants me to download all our photo's to external drive and drop into a fireproof safe. How can I do this. Can't seem to find a way to just copy the photo folder and paste it onto a external drive. I've put this off for years do to this reason. I just need to get it done. Can someone…
-
what is a max supported disk size for NAS325 v2 (firmware NSA325_4.81(AAAJ.1))
Hello, I have a very old NAS325 v2 (firmware NSA325_4.81(AAAJ.1)) which I still use, and recently one 3TB disk has died. So I look for HDD replacement now and I wonder what is a max supported disk size for NAS325 v2 (firmware NSA325_4.81(AAAJ.1))? On the other side - what would be your recommendation for HDD size so my old…
-
how to (properly) exchange disks on NSA325 (firmware NSA325_4.81(AAAJ.1))
Hello, I had 2 3TB Hitachi HDD as RAID1. Now disk2 has died and I am willing to exchange it with something new. Do I understand correctly the process of exchanging disks on NSA325? 1) power down NAS 2) remove disk 2 (in case of NSA325 it would be the right disk/slot) 3) start NAS and repair the volume if and when I get…
-
Where do I find the source for NAS 542 firmware
I would like to learn how to residently map physical directories (or paths) from the local disk-0 (i-data) into the virtual ram-disk to keep changes and addons after a reboot. I have fundamental problems to install Entware-ng package because knowledge to understand the boot strategy or procedure and where to put executable…
-
NAS542, Download previous Firmware
Hello, I have a NAS542 and the firmware V5.21 (ABAG.7) installed. Since the firmware was installed, the NAS no longer switches off in the late evening. This worked perfectly with the previous firmware version.Where can I download the previous firmware version? (If possible please a direct link). Thanks and regards ...…
-
NSA325v1 - Alternative firmware
Hello everyone, I have an NSA325v1 which still covers what I need from a hardware perspective. However, due to Zyxel not providing any more firmware updates, I'd like to migrate to OpenWRT. Has anyone in the forum managed to do this and is willing to share their experience? Can the firmware be replaced without having to…
-
Terascale drive compatibility with NAS326
Hi! I have purchased 2 Terascale v2 HDDs (Seagate ST8000NC0002) for my NAS326. The goal was to replace 2 older 3TB drives in RAID1 with these 8TB ones. And it does not work. The drives are recognized by NAS with no problems, when I replace one of the old drives with the new one, NAS reports RAID1 volume as degraded and…
-
NSA325v2 - Rescue Data from single HDD -
Hello everybody, my name is Bastian and I had a NSA325v2 with a single disk (3TB Seagate) running as a personal storage. Mainly because I am using multiple Macs/Laptops etc. So far so good. As of today, I am not able to access my files because the NAS starts rebooting once the HDD is installed. It keeps active once…
-
Volume is down - what to do?
Dear All, After a power failure, my NAS326 did not respond and I could not login on NAS on the web. After a factory reset, a managed to get in, but I got the message that the volume is down. (I got two HDDs, but I used only one.) Based on what I found in earlier posts, I accessed the NAS via SSH and obtained some…
-
ZyXEL NSA325-v2 shows errors when running e2fsck
Hi all, Recently I upgraded my NAS-325 v2 with 2x4TB hard discs, I got everything working with the help of @Mijzelf (thanks a lot). I did a scan of /dev/md0 with e2fsck, just to make sure the file system is ok : root@NSA325-v2:~# e2fsck.new -n /dev/md0 e2fsck 1.41.14 (22-Dec-2010) Warning! /dev/md0 is mounted. Warning:…
