-
NSG100 Dual Active WAN, separate LAN clients
Good day All, I am almost 99% sure this is an active config. I have dedicated WAN1 link, with a LTE on WAN2. I need to allow LAN clients 1-10 to use WAN 1 then LAN clients 11-20 to utilize WAN 2. WAN load balancing algorithm is currently set to Lead load first. I have configured Port 3-4 on LAN1 and Port 5-6 for LAN2. Now…
-
Kanalbreite 40Mhz in Radio Einstellungen
Hallo liebe Nebula-Community, Meine Frage -wie kann ich die Kanalbreite in Radio Einstellungen bei 2.4 GHz auf 40 MHz- fest-stellen. Stelle schon auf 40Mhz -bleibt aber die Einstellung wirkungslos. Wenn ich in 2,4-GHz-Kanalbereitstellung Three-Channel Deployment auswähle bleibt bei 20Mhz, bei manuelle Kanalauswahl markiere…
-
How To Extract MAC Address and Serial Number of Devices From A Nebula Site
I wish to extract mac address and serial number from NCC portal preferably into excel. (not the other way around) I cant seem to do this. Are there any steps?
-
[NEBULA] Legal Logs
Where is it possible to see and export legal logs for the nebula AP for connected clients (for wlan security or captive portal) ?
-
nur 3/10 nwa-1123acv2 online
hallo. haben heute 10 nwa-1123acv2 aufgehängt und in die ncc integriert. sind bei allen genau gleich vorgegangen, leider sind aber nur 3 der 10 wirklich online. selbst diese 3 haben sich erst nach einer (plötzlichen) 7stündigen offline-pause wieder online gemeldet. wo könnte hier der fehler begraben sein? die betroffenen…
-
Gebündelte NCC Punkte
Hallo, ich habe eine Frage zu den gebündelten NCC Punkten bei AP´s.ist es richtig, das die NWA1123-ACv2 AP´s zu der Kategorie an Geräten gehören bei denen, bei Neukauf, keine NCC Punkte dabei sind? Ich meine mich zu erinnern, solche Geräte eingebunden zu haben und das da Punkte dabei waren.Gelesen habe ich aber das es wohl…
-
How To Upgrade The Security Gateway From NCC Portal
I only know how to configure the SSID. I dont see a place to select to upgrade the security gateway.
-
how to add a previously remove NAP102 to organization and site?
I removed a NAP102 access point via Nebula Control Center from existing organization and site but now cannot seem to add it back on
-
GS1920-8HP Nebula LogIn - Web Gui - Easy Configuration
Hi there, I KNOW. That i don't know... I probably got the wrong Device for my Purpose. I thought it should be easy, but failed. So i hope you can help the ultimate rookie ;-) 8+2 Ports. Idea is to seperate into 3 VLANS. All V-LANS should be able to connect to an Uplink Port where the Router is connected. (Internet)…
-
Download speed
Hi, the download speed over AP is terribly low (same devices and same setup used to perform better). If I connect my laptop to the cable which is used for AP, I am getting 600 mbit download and 110 upload. even if I am placing my devices just next to the AP, the download speed is between 85 and 150 mbit, depending on the…
-
USG Flex Firewalls
Hey Guys So what is the roadmap for these going live on Nebula or are they already able to do this?
-
NWA1123-ACV2 and AppleDevices
The AC does’t work good with iphones and ipads. Absolutelly low connection and Continous network lack. Any ideas to solve this big problem ?
-
How To Change The management vlan of AP in NCC for many AP at the same time?
How To Change The management vlan of AP in NCC for many AP at the same time? I can change in status > LAN IP but this is for individual AP. How do I do it for many APs? This is the option for 1 AP: This is what I want to do: I want to change the management vlan for multiple APs. However, it only has the option for a single…
-
How To Change The management vlan of AP in bulk in NCC
How To Change The management vlan of AP in NCC for many AP at the same time? I can change in status > LAN IP but this is for individual AP. How do I do it for many APs? This is the option for 1 AP: This is what I want to do: I want to change the management vlan for multiple APs. However, it only has the option for a single…
-
Button to disconnect a wireless client
I would like to see a "reconnect" button for wireless clients. Sometimes it is helpful to disconnect a wireless client to force it to move onto another SSID, or pull another IP address, or for general troubleshooting.
-
Removing license from site
Hi, I have a few organizations in Nebula with no devices, but still active licenses. I want to delete these organizations, so how do I delete/remove the active licenses? Regards,Joris
-
NSG: Real UTM?
Hello, we have customers with an own exchange inhouse. For this we wish on the NSG a real UTM, also with functionality of spamfilter on smtp. Is this possible? Regards Mascho
-
Montageplatte-Bracket für NAP303 gesucht
Hallo liebe Nebula Community, mir fehlen die "mounting brackets" für die Deckenmonage von 4 Stk. NAP303-APs eine Art "spring-operated rectangular bracket" sollte existieren, s. Bild finde aber keine weitere Infos über diese Montageplatte. Kann als Ersatzteil die bestellt werden? Existieren 3D-Druck -Template dazu? Bin für…
-
NCC will stop message NSG100
Hi I have this message in my NSG100 admin panel "NCC will stop NSS-SP 2/4-year & NSS-IDP 1/2/4-Year license registration/activation since Feb, 1, 2021. Please kindly activate them as soon as you can." Is this anything to worry about, can I ignore it, I don't have any apid subscriptions BTW. Thank you.
-
Hybrid mode stand-alone with nebula
It should be possible
to send data for the monitor graphs to Nebula but keep AP in
stand-alone?
