-
NWA50AX: No 802.11r mobility domain in header
Using a packet sniffer I am unable to detect the 802.11r mobility domain information for NWA50AX. For NWA210AX, this 802.11r info seems to be available, for the same SSID. Does that mean that NWA50AX does not support 802.11r fast roaming? Firmware: V6.29(ABYW.1)
-
Some AP have a "Limited AP" status
Hi! I have USG FLEX 200 and 30 AP (WAX510D and WAC6552D-S). After setup all AP had a status "On-Line AP" in AP List. But today I found that all AP WAX510D have a "Limited AP" status. Why? How to return the status "On-Line AP" for all AP? Thanks
-
DOA NWA90AX
Hi, this mornig, for the first time, I have connected NWA90AX with his power supply. no lights come on and there are no signs of life. We used anothe power supply switch poe without any light or signs of life. How I can ask a DOA? Thanks
-
WAC500H compatibility with USG60 fw V4.73(AAKY.0)
hi, have anyone tested compatibility of WAC500H to be managed by USG60 fw V4.73(AAKY.0)? i can find AP in ap management of USG60 thanks in advance P.
-
Can someone clarify what this means?
I have a Zyxel 802.11ax (WiFi 6) Dual-Radio PoE Access Point (NWA50AX) that is connected to a Cisco Meraki Go Network Security (GX20). I've noticed lately my network has random “hiccups” that have become annoying to say the least. I checked the Log for the Zyxel and noticed something strange around one of the hiccups that…
-
Compatibility between Zyxel VMG8623-T50B and Tp-link Range extender RE315?
I have just installed a Zyxel VMG8623-T50B modem router and most of my devices are connected and working. I have connected 2 TP-link RE315 Range extenders but their range is very limited and the Zyxel is not listed amongst Tp-link's devices suitable for building a Mesh network. Can I extend their range without building a…
-
NWA50AX Mesh Stopped Working
Hi I'm having a few issues with my setup. NWA50AX - x4 hard wired NWA50AX - x3 running via mesh NWA5EAXE - x2 hard wired (one just running at min) All the hard wired APs are connected to a GS1900 24 port switch and are running over PoE. I had my site running ok for the past 8 months, but suddenly the mesh APs won't…
-
NXC2500 Additional SSID
Hi, I wonder if someone could check over our config (attached) We currently have working ok - 2 SSIDS. (Office IT and Office Guest) One for the office lan, VLANid 10 One for guests VLAN id 20 VLANid10 goes straight from NXC2500 to our network switch ok. VLANid20 goes straight from NXC2500 to our firewall We have Zyxel POE…
-
Firmware Website download Broken
Hello, I want to upgrade the firmware to the latest downloadable version for my ZyXEL EMG3425-Q10A. The website seems broken, whenever I click on the download button it takes me to an empty page. What do I do?
-
USG FLEX 500 no connection to WiFi if security profile is WPA2
USG FLEX 500 I have set up two SSIDs, both with VLAN. If the security profile iss et to open I can connect. But as soon as I enter a password, no matter whether WPA2 or
WPA3, a connection to the network is not possible. Does anyone have any idea why this might be
-
Configurazione nwa5123-ac
Ciao ragazzi, ho 2 nwa5123-ac che ho resettato ai dati di fabbrica. Connettendomi alla rete wi-fi “zyxel” non riesco a raggiungere l'indirizzo ip per la configurazione (192.168.1.2). Cosa sbaglio?
-
ERR_ADDRESS_UNREACHABLE Zyxel NWA5123-AC
Hi everyone, I can't connect to the configuration interface of my Zyxel. The browser gives me the error: ERR_ADDRESS_UNREACHABLE. How can I fix?
-
NWA210AX Low Upload Speed
It seems I can't get the upload speed close to download one. With the latest firware and the max power set I get download speed 900 mbps and 280 mbps upload speed. When connecting my computer directly to LAN I get upload speed similar to download one. Any idea what the issue might be? Do I have a hardware failure with my…
-
How to upgrade NWA5123-AC-HD firmware?
Hello, When I check the firmware update from my AP in standalone mode, it tells me that the latest release is the 6.25 release. My AP is also in the Wireless > AP Management. There, my FW tells me there is the 6.50 patch 1 available. It's not managed from the FW, so I can't download it. If I go on your website, the…
-
NWA50AX/GS1900-8HP VLAN Configuration
I am having an issue (probably due to my misconception and misconfiguration of something) getting my new NWA50AX AP and GS1900-8HP working successfully with VLANs. Sorry that this is such a long post, but I wanted to try to explain my configuration and issue in detail. I have the following configuration: NWA50AX Updated…
-
NWA50AX firmware update stalled, HELP!
Hi, Started configuring this straight out of the box, and after getting connection I decided to start by upgrading the firmware from 6.25. I am using direct management, so I downloaded the NWA50AX_6.29(ABYW.1)C0 package, unzipped it and from the maintenance tab of management interface told it to upload the bin file…
-
AP Mesh Suddenly Dropped
Hi I have had a Wireless LAN running fine for a few months. NWA50AX - x5 wired to main router NWA50AX - x3 set via mesh NWA55AXE - x2 wired to main router (only using 1 at the min) My 4 wired APs are PoE and connected to a Zyel PoE switch. Everything was OK but my mesh APs no longer connect to the network. I've tried…
-
Release date for NWA1123-AC-HD?
I'm curious to know when the NWA1123-AC-HD was released? Sad to see it is EOL Thanks!
-
Cheap AP for IoT Devices?
Hi I got short time ago an used NXC2500 Wireless LAN Controller for my WAC AP. Everything working beside some IoT Device (Wifi USB Switch) who have a Crappy Antenna and lose often the Wifi Connection. So I thought why not buy some Cheap used Zyxel AP who work with the NXC2500 to connect all the 2,4 Ghz Device in my Network…
-
AP Management and User traffic
Hello- I was wondering what protocol(s) Zyxel wireless access points use for user traffic and management traffic? Is it GRE or something else? Thanks, Matt
