-
Multy m1
Good morning, I am attaching the system diagram. I tried connecting the mesh line first, and then wiring it via the switch, but only the main router connects via cable, the satellite routers, even if connected via Ethernet cable to the WLAN port, are connected via Wi-Fi. For greater speed I should: 1: create three…
-
Setup Multy M1 in Access Point mode? How?
I am trying to connect these to my network, but the initial setup page I accessed via the website will not run without plugging the M1 into my network via the LAN port and then I have all kinds of issues. Is there an easy way to add this device as an access point? I have configured my DHCP server to allocate IP addresses…
-
Dropped wifi
My Apple phone logs onto my Multi X WiFi network but when my phone opens from sleep mode it’s not connected to the WiFi and if I go into the Multiy X app it says that it connecting. WiFi will then connect #MultyX_Nov_2018
-
Multi M1 unblock
Why is there a function called “always block” and you can’t unblock. no regrets what so ever. But is there any way to unblock anyway??
-
Instable wlan
I’ve got an issue with wlan. Sometimes I loose connection and asks one of my systems to fill in the password again. How is that possible ?
-
Multy M1 WSM20 AX1800 - satellite slow internet
Hi, I have 3x M1 mesh devices named and configured as follows: Router - This is the "Main" device connected with an ethernet cable directly to my NR5103 internet router. Squidge - a satellite router in a bedroom, connected via wireless to the Router. Backhaul reports "perfect" Lounge - another satellite connected via…
-
Multy M1 AX1800 - Mesh not working when in bridge mode
Hello, When I configure my 2 M1 in standard mode, the mesh is working as the two M1 have a green led on. However, when I put them into bridge mode the sattelite's led stays red as if it would not connect to the internet. Does someone have a solution for this Problem ? Regards
-
Wifi test
when i want to test wifi signal i get an error with message: connect the device with multy network, bit my iphone is connected! And in other forum i wrote that the wifi is very very unstable. I thoughy mesh system was to created a stable and fast wifi in your house but my wifi was better with the cheal router from my…
-
M1-latest firmware version
Hi, What is the M1's latest firmware? Is it v1.00 (ABZF.5)C0? Why my M1 is back to V1.00(ABZF.4)C0?
-
Multiples bugs on Multy M1 AP
Hello, I notice many bugs on the AP Multy M1, including: -> When disabling the WPS from the web interface, the master AP correctly applies the parameter but the satellites (WPS still active on them). -> Unable to apply 40 Mhz bandwidth on 2.4Ghz Wi-Fi (parameter applies to master but not to satellites) -> Regularly an SSID…
-
Multy M1 wired Mesh extension possible?
I found a bargain on this product, but before going to buy I wanted to know if it is possible to connect these Mesh devices also by LAN cable so that the extension signal will be better?
-
Multy M1: wifi backhaul remains active with wired setup
I have 3pack M1s, setup in wired topology. In wifi analys app I notice that hidden Networks remain active as well. I think this is unnecessary and creates unnecessary transmissions and draws unnecessary power. Why is the wifi backhaul not suspended in wired config? Can the wifi backhaul be stopped in some way?
-
Devices logged into Multy X app
Hi, a colleague and I were managing our Multy X app and devices. We both logged in the apps using the same Zyxel Cloud account. Recently, I have changed the password but she told me that she is still logged in. I did not find the list of logged in devices using a Zyxel cloud account. My questions are that: 1. Is it true…
-
Problems with connecting multy u
I downloaded The app connected multy u with Ethernet cable to wall rj42 and plugged in Power IT turns blue and when i try to create name and password IT says applying tour wifi settings to multy For like 3 mins and Then says "setting failed multy requires reset. And after i do reset IT just says connection Timed Out when i…
-
M1 - How to switch off the led light
Hello, I'm using Multy M1 and for security reason I'd like to switch off the status led light. Is it possible? How can I do?
-
How to setup two M1 extenders to main Multy M1 by ethernet connection
Hi, I would like to connect my 2 additional M1 extenders to main M1 by ethernet connection, what is setup procedure to do that?
-
Big issues with Multi M1
ok I put a M1 in Bridemode behind another Router connected via lan cable added 2 M1 sattelite behind looks like mesh is not working at all as even sitting next to a sattelite my mobile shows weak wlan 2nd the main m1 seems to lose internet function so when i connect it only says connect without internet internet on router…
-
Can Multy M1 coexist with other Mesh device provide by ISP
Hi all, Is it possible that i can use Multy M1 coexist with other mesh band device that my local ISP provided (it's the bundle package that ISP offered)? Please note that 1. The main Multy M1 will be wired connect to LAN1 of ISP's router. 2. The mesh device provided by ISP will be wired to LAN2 of ISP's router. Thank for…
-
Zyxel - please add WiFi channel selection to Multy-X!!
Hi Zyxel, I've been using three WSQ50's for a couple of years now and even though they work fantastic (most of the time) they still have the occasional issues.. One such issue is the inability to select WiFi channel. All 3 of my WSQ50's refuse to budge from 2.4 GHz channel 4 and 5 GHz channel 42. This clashes heavily with…
-
Could not connect mobile app to Multy U after reset
Hello! I have two-units Multy U system for more than half a year. 2 weeks ago I got a notification about a new firmware update. After the update, it worked without any problem. But last Friday the wi-fi network stays accessible but without the Internet. After a conversation with my provider, I found that the Internet works…
